Reactivation of the Flight Attendant Panel

TASK 23-73-00-440-003-A
Reactivation of the Flight Attendant Panel

FIN: 120RH ** ON A/C NOT FOR ALL

1. Reason for the Job
MMEL 23-74-01B
FLIGHT ATTENDANT PANEL (FAP) DISPLAY UNIT (FAA ONLY)
2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TASK 11-00-00-000-003-A	Removal of the Pressurized Area Placards
TSM 23-73-00-810-838	FAP - Fault in the Forward Attendant Panel

3. Procedure
Subtask 23-73-00-865-259-A ** ON A/C NOT FOR ALL

A. Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s):

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
121VU	COM CIDS FWD ATTND PNL	170RH	Q14
** ON A/C NOT FOR ALL
121VU	COM/FAP1/NORM	170RH	Q14
** ON A/C NOT FOR ALL
121VU	COM NAV/CIDS/FWD ATTND/PNL	170RH	Q14

Subtask 23-73-00-040-053-A ** ON A/C NOT FOR ALL

B. Reactivation of the Flight Attendant Panel (FAP)
(1) Do the trouble shooting for the defective FAP.
TSM 23-73-00-810-838
(2) Remove the placard "INOP" from the reactivated system (Ref. AMM TASK 11-00-00-000-003).

4. Close-up
Subtask 23-73-00-860-191-A ** ON A/C NOT FOR ALL

A. Put the aircraft back to its initial configuration.
(1) Make sure that the work area is clean and clear of tools and other items.

[Rev.10 from 2021] 2026.03.31 23:16:52 UTC