Removal of the Pressurized Area Placards

TASK 11-00-00-000-003-A
Removal of the Pressurized Area Placards

WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL MANUFACTURER'S INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

1. Reason for the Job
Self explanatory
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	SCRAPER - PLASTIC

B. Consumable Materials

REFERENCE	DESIGNATION
(Material No.08BBB1)	Non Aqueous Cleaner-- Petroleum Based -
(Material No.14SBA1)	Textile-Lint free Cotton -

3. Job Set-up
Subtask 11-00-00-941-058-A

A. Get Access
(1) Get access to the area where you must remove the placard.

4. Procedure
Subtask 11-00-00-000-050-A

A. Removal of the Placard

CAUTION: DO NOT USE A METAL SCRAPER TO REMOVE THE UNWANTED MATERIAL. A METAL SCRAPER CAN CAUSE DAMAGE TO THE SURFACE OF THE COMPONENT.

(1) Remove the placard with a SCRAPER - PLASTIC.

Subtask 11-00-00-110-073-A

B. Cleaning
(1) Remove unwanted glue with Textile-Lint free Cotton - (Material No.14SBA1) soaked with Non Aqueous Cleaner-- Petroleum Based - (Material No.08BBB1) then thoroughly dry out.

5. Close-up
Subtask 11-00-00-942-073-A

A. Make sure that the work area is clean and clear of tools and other items.

[Rev.10 from 2021] 2026.04.01 05:37:24 UTC