Quick Leveling Using the Attitude Monitor

TASK 08-21-00-200-001-A
Quick Leveling Using the Attitude Monitor

1. Reason for the Job
There is an alternative method for this procedure. This task gives one of the methods. For the other method, refer to the other task in this Page Block.
2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
192MB

C. Referenced Information

REFERENCE	DESIGNATION
TASK 07-11-00-581-001-A	Lifting for Aircraft Maintenance Operations
TASK 07-11-00-586-002-A	Lowering of the Aircraft for Maintenance Operations
Position of the Trim Indicator ** ON A/C NOT FOR ALL

3. Job Set-up
Subtask 08-21-00-010-050-A ** ON A/C NOT FOR ALL

A. Get Access
(1) Put an ACCESS PLATFORM 2M (6 FT) - ADJUSTABLE in position.
(2) Open the access panel 192MB

Subtask 08-21-00-581-050-A ** ON A/C NOT FOR ALL

B. Aircraft Lifting

CAUTION: YOU MUST NOT LIFT THE AIRCRAFT WITH THE SAFETY STAY.

(1) Lift the aircraft (Ref. AMM TASK 07-11-00-581-001).

NOTE: Do not put the safety stay in position before you make the aircraft level.

4. Procedure
Subtask 08-21-00-210-051-A ** ON A/C NOT FOR ALL

A. Aircraft Leveling

Position of the Trim Indicator ** ON A/C NOT FOR ALL

(1) Operate the jacks of the aircraft to move the bubble to the D4 position.

NOTE: The D4 position relates to a longitudinal angle of 0° and transverse angle of 0°.

(2) Put the safety stay in position between FR73 and FR74.

5. Close-up
Subtask 08-21-00-586-050-A ** ON A/C NOT FOR ALL

A. Aircraft Lowering
(1) Lower the aircraft (Ref. AMM TASK 07-11-00-586-002).

Subtask 08-21-00-410-050-A ** ON A/C NOT FOR ALL

B. Close Access
(1) Close the access door 192MB.
(2) Remove the access platform(s).
(3) Make sure that the work area is clean and clear of tools and other items.

[Rev.10 from 2021] 2026.03.31 22:52:58 UTC