DOC AIRBUS | AMM A320FInspection after Engine Windmilling (After Engine In-Flight Shut Down)
TASK 05-51-34-200-001-A
Inspection after Engine Windmilling (After Engine In-Flight Shut Down)
1. Reason for the Job
Do this procedure if an engine In-Flight Shut Down (IFSD) occurred (the engine is balanced).
If the engine is not balanced (part liberation), you must do procedure 05-51-26 Inspection after an Engine Failure.
2. Job Set-up Information
A. Referenced Information
3. Job Set-up
Subtask 05-51-34-860-050-A
Subtask 05-51-34-210-050-A ** ON A/C NOT FOR ALL
[Rev.10 from 2021]
2026.03.31 22:51:54 UTC
Inspection after Engine Windmilling (After Engine In-Flight Shut Down)
1. Reason for the Job
Do this procedure if an engine In-Flight Shut Down (IFSD) occurred (the engine is balanced).
If the engine is not balanced (part liberation), you must do procedure 05-51-26 Inspection after an Engine Failure.
2. Job Set-up Information
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| TASK 72-00-00-100-001-A | Engine Dry-out and Re lubrication |
| TASK 72-00-00-100-007-A | Engine Dry-out and Re lubrication |
| TASK 72-00-00-200-021-A | Inspection after Engine Windmilling |
| TASK 72-00-00-210-814-A | Inspection of the Engine after Engine Windmilling |
Subtask 05-51-34-860-050-A
A. Not Applicable
4. ProcedureSubtask 05-51-34-210-050-A ** ON A/C NOT FOR ALL
A. Do the engine dry-out and relubrication procedure after each IFSD (Ref. AMM TASK 72-00-00-100-001).
Subtask 05-51-34-210-050-B ** ON A/C NOT FOR ALL Subtask 05-51-34-210-050-C ** ON A/C NOT FOR ALL A. Do the engine dry-out and relubrication procedure after each IFSD (Ref. AMM TASK 72-00-00-100-007).
Subtask 05-51-34-210-050-E ** ON A/C NOT FOR ALL