GENERAL VISUAL INSPECTION OF EMERGENCY EXITS INCLUDING DOOR SURROUND ON FUSELAGE AND DOOR SEALS, EXTERNAL SURFACE (EWIS)

TASK 05-28-30-200-013-A
GENERAL VISUAL INSPECTION OF EMERGENCY EXITS INCLUDING DOOR SURROUND ON FUSELAGE AND DOOR SEALS, EXTERNAL SURFACE (EWIS)

ZONE: 834
ZONE: 844

1. Reason for the Job
Refer to the MPD TASK: ZL-834-05

NOTE: This is an EWIS (Electrical Wiring Interconnection System) procedure. EWIS is defined in ESPM 20-33-11.

2. Job Set-up Information
A. Fixtures, Tools, Test and Support Equipment

REFERENCE	QTY	DESIGNATION
No specific	AR	ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE

B. Work Zones and Access Panels

ZONE/ACCESS	ZONE DESCRIPTION
834	EMERGENCY EXITS
844	EMERGENCY EXITS
834, 844

C. Referenced Information

REFERENCE	DESIGNATION
TASK 52-21-11-000-001-A	Removal of the Emergency Exit Hatch
TASK 52-21-11-400-001-A	Installation of the Emergency Exit Hatch

3. Job Set-up
Subtask 05-28-30-010-058-A ** ON A/C NOT FOR ALL

A. Get Access
(1) Put an ACCESS PLATFORM 4M (13 FT)-ADJUSTABLE in position at zone 834(844).
(2) Remove the emergency exit hatches 834 844 (Ref. AMM TASK 52-21-11-000-001).

4. Procedure
Subtask 05-28-30-210-062-A ** ON A/C NOT FOR ALL

A. Inspection
(1) Do a general visual inspection of the emergency exits. This inspection includes the door surround on the fuselage, the door seals and the external surface of the door.
(2) Make sure that there are no signs of corrosion, cracks or damage.
(3) Make sure that all the installations are attached correctly.

5. Close-up
Subtask 05-28-30-410-058-A ** ON A/C NOT FOR ALL

A. Close Access
(1) Install the emergency exit hatches 834 844 (Ref. AMM TASK 52-21-11-400-001).
(2) Remove the access platform(s).

[Rev.8 from Aug 2017] 2026.03.31 22:51:12 UTC