Failure of the PS12 Signal on Engine 2
TASK 73-20-00-810-866-A
Failure of the PS12 Signal on Engine 2
1. Possible Causes
A. Referenced Information
3. Fault Confirmation
Subtask 73-20-00-710-148-A ** ON A/C NOT FOR ALL
Subtask 73-20-00-810-116-A ** ON A/C NOT FOR ALL
[Rev.8 from Aug 2018]
2026.04.04 04:35:23 UTC
Failure of the PS12 Signal on Engine 2
1. Possible Causes
- PS12 Sense Line
- ECU [4000KS]
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| AMM 72-23-00-000-006 | Removal of the PS12 Line |
| AMM 72-23-00-000-040 | Removal of the PS12 Line |
| AMM 72-23-00-280-002 | Inspection/Check of the PS12 line |
| AMM 72-23-00-280-003 | Inspection/Check of the PS12 Line |
| AMM 72-23-00-400-006 | Installation of the PS12 Line |
| AMM 72-23-00-400-040 | Installation of the PS12 Line |
| AMM 73-21-60-000-001 | Removal of the Electronic Control Unit (ECU) |
| AMM 73-21-60-400-001 | Installation of the Electronic Control Unit (ECU) |
Subtask 73-20-00-710-148-A ** ON A/C NOT FOR ALL
A. Test
(1) Not applicable, the fault is evident.
4. Fault Isolation(1) Not applicable, the fault is evident.
Subtask 73-20-00-810-116-A ** ON A/C NOT FOR ALL
A. Test
(1) Inspect the PS12 Sense Line for loose connections, broken tubes and brackets or blocked ports AMM 72-23-00-280-003.
(a) If damage is found:
(a) If the test gives the maintenance message PS12 SENS LINE, ECU:
Subtask 73-20-00-810-116-B ** ON A/C NOT FOR ALL (1) Inspect the PS12 Sense Line for loose connections, broken tubes and brackets or blocked ports AMM 72-23-00-280-003.
(a) If damage is found:
- replace, retighten or repair PS12 Sense Line AMM 72-23-00-000-006, AMM 72-23-00-400-006.
- continue the troubleshooting as follows.
(a) If the test gives the maintenance message PS12 SENS LINE, ECU:
- replace the ECU AMM 73-21-60-000-001 AMM 73-21-60-400-001.
- no action is required.
A. Test
(1) Inspect the PS12 Sense Line for loose connections, broken tubes and brackets or blocked ports AMM 72-23-00-280-002.
(a) If damage is found:
(a) If the test gives the maintenance message ECU (PS12 SENSOR):
(1) Inspect the PS12 Sense Line for loose connections, broken tubes and brackets or blocked ports AMM 72-23-00-280-002.
(a) If damage is found:
- replace, retighten or repair PS12 Sense Line AMM 72-23-00-000-040, AMM 72-23-00-400-040.
- continue the troubleshooting as follows.
(a) If the test gives the maintenance message ECU (PS12 SENSOR):
- replace the ECU AMM 73-21-60-000-001 AMM 73-21-60-400-001.
- no action is required.