Integrated Fuel Pump and Control/FMV-Track Check Channel A and B
TASK 73-11-00-810-879-A
Integrated Fuel Pump and Control/FMV-Track Check Channel A and B
1. Possible Causes
2. Job Set-up Information
A. Referenced Information
3. Fault Confirmation
Subtask 73-11-00-710-139-A ** ON A/C NOT FOR ALL
Subtask 73-11-00-810-168-A ** ON A/C NOT FOR ALL
Subtask 73-11-00-860-117-A ** ON A/C NOT FOR ALL
[Rev.8 from Aug 2018]
2026.04.04 04:36:36 UTC
Integrated Fuel Pump and Control/FMV-Track Check Channel A and B
1. Possible Causes
2. Job Set-up Information
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| TSM TASK 73-11-00-810-808-A | Integrated Fuel Pump and Control/FMV-Track Check Channel A |
| TSM TASK 73-11-00-810-813-A | Integrated Fuel Pump and Control/FMV-Track Check Channel B |
Subtask 73-11-00-710-139-A ** ON A/C NOT FOR ALL
A. Not Applicable
4. Fault IsolationSubtask 73-11-00-810-168-A ** ON A/C NOT FOR ALL
A. Do the two tasks as follows:
(1) Do the troubleshooting procedure (Ref. TSM TASK 73-11-00-810-808).
(2) Do the troubleshooting procedure (Ref. TSM TASK 73-11-00-810-813).
5. Close-up(1) Do the troubleshooting procedure (Ref. TSM TASK 73-11-00-810-808).
(2) Do the troubleshooting procedure (Ref. TSM TASK 73-11-00-810-813).
Subtask 73-11-00-860-117-A ** ON A/C NOT FOR ALL
A. Put the aircraft back to its initial configuration.
(1) Make sure that the work area is clean and clear of tools and other items.
(1) Make sure that the work area is clean and clear of tools and other items.