DOC AIRBUS | TSM A320FAsymmetric Thrust (EPR) at Flex Take Off
1. Possible Causes
2 Job Set-up Information
A. Referenced Information
REFERENCE DESIGNATION
Ref. AMM 73-22-11-000-010 Removal of the P2/T2 Sensor
Ref. AMM 73-22-11-400-010 Installation of the P2/T2 Sensor
3. Fault Confirmation
Subtask 73-00-00-710-280-A
A. Not applicable
4. Fault Isolation
Subtask 73-00-00-810-199-A
A. Test
(1) On the panel 115VU:
(a) Put a warning notice to tell persons not to start the engine 1(2).
(2) Make sure the engine 1(2) has been shutdown for at least 5 minutes.
(3) On the panel 50VU:
(a) Make sure that the ON legend of the ENG FADEC GND PWR pushbutton switch is off.
(b) Install a warning notice.
(4) Put the access platform in position to give access to the air intake cowl.
(5) Inspect the P2T2 Sensor for signs of blockage or damage. If necessary replace the P2T2 Sensor Ref.
AMM 73-22-11-000-010 and Ref. AMM 73-22-11-400-010 .
(6) Remove the access platform.
(7) Remove the warning notices. [Rev.6 from Feb 2017] 2026.04.04 04:36:09 UTC