Flexible Temperature not Entered

TASK 73-00-00-810-870-A
Flexible Temperature not Entered

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
ASM 732506

3. Fault Confirmation
Subtask 73-00-00-710-186-A ** ON A/C NOT FOR ALL

A. Test
(1) On the MCDU, make sure that the FLEX TEMP value is correctly entered.

4. Fault Isolation
Subtask 73-00-00-810-120-A ** ON A/C NOT FOR ALL

A. If the fault symptom is identified by the ECAM warning message FLEX TEMP NOT SET:

NOTE: Do this procedure on the two engines.

do a check and repair the aircraft wiring between the MCDU (3CA1) (3CA2)/FCU (2CA)/FMGC (1CA1) (1CA2)/EIU (1KS1) (1KS2) and the ECU (4000KS) ASM 732506.

Subtask 73-00-00-710-187-A ** ON A/C NOT FOR ALL

B. After the subsequent flight, make sure that the fault does not continue.

[Rev.8 from Aug 2018] 2026.04.04 04:35:11 UTC