Engine Identification-Module Fault (APS 3200)

TASK 49-70-00-810-815-A
Engine Identification-Module Fault (APS 3200)

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
ESPM 2052210
ESPM 2053210
ESPM 205321A
AMM 49-00-00-710-005	Self-Test of the ECB
ASM 496102
AMM 49-73-31-000-001	Removal of the Engine Identification Module (APS 3200)
AMM 49-73-31-400-001	Installation of the Engine Identification Module (APS 3200)

3. Fault Confirmation
Subtask 49-70-00-710-078-A ** ON A/C NOT FOR ALL

A. Do the self-test of the ECB (59KD) AMM 49-00-00-710-005.

4. Fault Isolation
Subtask 49-70-00-810-064-B ** ON A/C NOT FOR ALL

A. If the APU Class 3 Faults Page gives the maintenance message:

SERIAL NUMBER ENCDR (8061KM):
Fault Code Number: 041 or 130

replace the ENGINE IDENTIFICATION MODULE (8061KM) AMM 49-73-31-000-001 and AMM 49-73-31-400-001.

(1) If the fault continues:

do a check and repair the wiring from the ECB (59KD) AB/D9, J7, J8, D10 to the ENGINE IDENTIFICATION MODULE (8061KM) P20/5, 14, 10, 9 ASM 496102 ESPM 2052210 ESPM 2053210 ESPM 205321A.

Subtask 49-70-00-710-079-B ** ON A/C NOT FOR ALL

B. Do the test given in Para. 3.

[Rev.8 from Aug 2018] 2026.04.04 04:34:41 UTC