Rinse Water keeps Flowing in Toilet Bowl

TASK 38-31-00-810-819-A
Rinse Water keeps Flowing in Toilet Bowl

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
AMM 38-31-00-710-009	Operational Test of the Toilet Unit
AMM 38-31-55-100-001	Remove, clean and inspect Toilet Rinse Valves from all Toilets

3. Fault Confirmation
Subtask 38-31-00-710-085-A

A. Test
(1) Do a test of the vacuum toilet system AMM 38-31-00-710-009.

4. Fault Isolation
Subtask 38-31-00-810-098-A

A. If water keeps flowing into the toilet bowl after the flush cycle is over:

Subtask 38-31-00-710-086-A

B. Do the test as given in paragraph 3. A. and check the correct operation of the toilet.

[Rev.8 from Aug 2018] 2026.04.04 04:34:13 UTC