PRV Closed in Green in ECAM Bleed Page in Engine 2

TASK 36-11-00-810-966-A
PRV Closed in Green in ECAM Bleed Page in Engine 2

1. Possible Causes

VALVE-BLEED PRESS REG [4001HA]
[4001HA2]
BMC-2 [1HA2]
BMC-1 [1HA1]
CONT-AIR COND SYSTEM 1 [47HH]
wiring

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
AMM 21-61-34-000-002	Removal of the Air-Conditioning System Controller
AMM 21-61-34-400-002	Installation of the Air-Conditioning System Controller
AWM 216301
AMM 31-32-00-860-001	Procedure to Get Access to the SYSTEM REPORT/TEST Menu Page
AMM 31-32-00-860-002	Procedure to Get Access to the SYSTEM REPORT/TEST/AIR COND Page
AWM 361104
AWM 361105
AMM 36-11-34-000-001	Removal of the BMC
AMM 36-11-34-400-001	Installation of the BMC
AMM 36-11-52-000-010	Removal of the Bleed Pressure-Regulator Valve
AMM 36-11-52-400-010	Installation of the Bleed Pressure-Regulator Valve
AMM 36-11-52-720-001	Functional Test of the Opening of the Bleed-Pressure Regulator Valve (PRV) with the Bleed Test Set P/N 98D36003000000
AMM 36-11-52-720-010	Functional Test of the Opening of the Bleed-Pressure Regulator Valve (PRV) with the Bleed Test Set P/N 98D36003000000
AWM 715103
Access to System Bleed Page

3. Fault Confirmation
Subtask 36-11-00-740-085-A ** ON A/C NOT FOR ALL

A. TEST
(1) Do a check of the PRV position indication when the Bleed System is on.

4. Fault Isolation
Subtask 36-11-00-810-310-A ** ON A/C NOT FOR ALL

A. Access to the SYSTEM REPORT/TEST/AIR COND to check the Maintenance Message related to the CONT-AIR COND SYSTEM 1 (47HH).
(1) Do the SYSTEM REPORT TEST of the AIR COND system.
(a) Get access to the SYSTEM REPORT/TEST/AIR COND page AMM 31-32-00-860-001.
(b) Push the line key adjacent to the TEMP CTL indication.
(c) On the CAB TEMP CTL menu page AMM 31-32-00-860-002.
1 Push the line key adjacent to the ground report or push the line key adjacent to the LAST LEG REPORT.
(2) If the SYSTEM REPORT/TEST/AIR COND contains maintenance message related to the CONT-AIR COND SYSTEM 1 (47HH), do the associated trouble-shooting.
(3) If the SYSTEM REPORT/TEST/AIR COND does not contain fault message related to the CONT-AIR COND SYSTEM 1 (47HH), continue the trouble-shooting.

Subtask 36-11-00-810-311-A ** ON A/C NOT FOR ALL

B. Get access to the SYSTEM BLEED PAGE in the ECAM.

Access to System Bleed Page ** ON A/C NOT FOR ALL

(1) Push the bleed P/B in the ECAM control panel.
(2) Do a check of the PRV position indication in the lower ECAM/Bleed page.
(3) Do the Functional test of the VALVE-BLEED PRESS REG [4001HA] AMM 36-11-52-720-010 or AMM 36-11-52-720-001.

NOTE: On Functional Test step 3, you must check on ECAM/SYSTEM PAGE/BLEED that the Bleed-pressure regulator valve is open (vertical green).

Subtask 36-11-00-810-313-A ** ON A/C NOT FOR ALL

C. If the ECAM position indication test of the [4001HA2] is not OK.
(1) Replace the VALVE-BLEED PRESS REG [4001HA] AMM 36-11-52-000-010 and AMM 36-11-52-400-010.
(2) Do the test give in Para. 4.B.

Subtask 36-11-00-810-314-A ** ON A/C NOT FOR ALL

D. If the test is OK:

Do a check of the PRV position indication when the Bleed System is on during the subsequent flight.

(1) If the fault continues:
(a) Do a check of the wiring between the VALVE-BLEED PRESS REG [4001HA] , BMC-2 [1HA2] , BMC-1 [1HA1] and the CONT-AIR COND SYSTEM 1 [47HH] :
1 Do a check of the wiring between CONT-AIR COND SYSTEM 1 [47HH] Connector AB/1B and Terminal Block 210VT/3B AWM 216301.
2 Do a check of the wiring between BMC-2 [1HA2] connector AA/2B and Terminal Block 210VT/3A AWM 361104.
3 Do a check of the wiring between VALVE-BLEED PRESS REG [4001HA] connector A5 and Terminal Block 210VT/3D AWM 715103 and AWM 361104.
4 Do a check of the wiring between BMC-1 [1HA1] Connector AA/10D and Terminal Block 210VT/3C AWM 361105.
5 Do a check of that the Terminal Block 210VT/3D, 3A, 3C and 3B are correctly isolated.
6 Disconnect connectors 3D, 3A, 3C and 3B from Terminal Block 210VT.
7 Check that the Terminal Block 210VT is correctly isolated from Aircraft Ground.
(2) If there is damaged or malfunction in the wiring or in a connector, replace it.
(3) If there is no damaged wiring and/or connectors:

Replace the CONT-AIR COND SYSTEM 1 [47HH] AMM 21-61-34-000-002 and AMM 21-61-34-400-002.

(4) Do the test give in Para. 4.B.

Subtask 36-11-00-810-289-A ** ON A/C NOT FOR ALL

E. If the test is OK:

Do a check of the PRV position indication when the Bleed System is on during

(1) If the fault continues:

Replace the BMC-2 [1HA2] AMM 36-11-34-000-001 and AMM 36-11-34-400-001.

(2) Do the test give in para. 4.B.

Subtask 36-11-00-810-315-A ** ON A/C NOT FOR ALL

F. If the test is OK:

Do a check of the PRV position indication when the Bleed System is on during the subsequent flight.

(1) If the fault continues:

Replace the BMC-1 [1HA1] AMM 36-11-34-000-001 and AMM 36-11-34-400-001.

[Rev.8 from Aug 2018] 2026.04.04 04:33:51 UTC