Spurious ENG BLEED fault indication on the Engine 2

TASK 36-11-00-810-958-A
Spurious ENG BLEED fault indication on the Engine 2

1. Possible Causes

BMC-2 [1HA2]
P/BSW-ENG 2 BLEED [4HA2]
wiring

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
AMM 36-11-00-740-001	BITE Test of the BMC 1(2)
ASM 361102
AMM 36-11-34-000-001	Removal of the BMC
AMM 36-11-34-400-001	Installation of the BMC

3. Fault Confirmation
Subtask 36-11-00-740-071-A ** ON A/C NOT FOR ALL

A. Test
(1) Do the BITE test of the BMC2 AMM 36-11-00-740-001.

4. Fault Isolation
Subtask 36-11-00-810-252-A ** ON A/C NOT FOR ALL

A. If the BITE test gives the maintenance message:
BMC2 OR BLEED FAULT IND 4HA2

replace the BMC-2 [1HA2] AMM 36-11-34-000-001 and AMM 36-11-34-400-001.

(1) If the fault continues:

replace the P/BSW-ENG 2 BLEED [4HA2] ASM 361102.

(a) If the fault continues:

do a check and repair the wiring ASM 361102 between:
. pin A/C2 of the engine 2 bleed pushbutton switch (4HA2) and pin AA/4A of the BMC2 (1HA2)
. pin A/C2 of the engine 2 bleed pushbutton switch and pin AA/4A of the BMC2
. pin A/C3 and the ground.

Subtask 36-11-00-810-252-D ** ON A/C NOT FOR ALL

A. If the BITE test gives the maintenance message:
BMC2 OR BLEED FAULT IND 4HA2

NOTE: If the maintenance message BMC2 OR BLEED FAULT IND 4HA2 comes into view with no associated ECAM warning, no trouble shooting procedure is necessary.

Replace the BMC-2 [1HA2] AMM 36-11-34-000-001 and AMM 36-11-34-400-001.

(1) If the fault continues:

Replace the P/BSW-ENG 2 BLEED [4HA2] ASM 361102.

(a) If the fault continues:

Do a check and repair the wiring ASM 361102 between:
. Pin A/C2 of the engine 2 bleed pushbutton switch (4HA2) and pin AA/4A of the BMC2 (1HA2)
. Pin A/C2 of the engine 2 bleed pushbutton switch and pin AA/4A of the BMC2
. Pin A/C3 and the ground.

Subtask 36-11-00-740-072-A ** ON A/C NOT FOR ALL

B. Do the test given in Para. 3.

[Rev.8 from Aug 2018] 2026.04.04 04:33:51 UTC