Shift of Calibration of the Bleed Regulated-Pressure Transducer of the Engine 2

TASK 36-11-00-810-822-A
Shift of Calibration of the Bleed Regulated-Pressure Transducer of the Engine 2

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
AMM 36-11-16-000-001	Removal of the Bleed Regulated Pressure-Transducer
AMM 36-11-16-400-001	Installation of the Bleed Regulated Pressure-Transducer

3. Fault Confirmation
Subtask 36-11-00-710-076-A ** ON A/C NOT FOR ALL

A. Not applicable.

4. Fault Isolation
Subtask 36-11-00-810-064-A ** ON A/C NOT FOR ALL

A. If the fault symptom is identified by the maintenance message REG PRESS XDCR 8HA2:

replace the XDCR-BLEED REGULATED PRESS, ENG 2 [8HA2] AMM 36-11-16-000-001 and AMM 36-11-16-400-001.

Subtask 36-11-00-810-064-B ** ON A/C NOT FOR ALL

A. If the fault symptom is identified by the Class 3 maintenance message:
36-11-16
DRIFT REG-PRESS XDCR 8HA2

replace the XDCR-BLEED REGULATED PRESS, ENG 2 [8HA2] AMM 36-11-16-000-001 and AMM 36-11-16-400-001.

Subtask 36-11-00-710-077-A ** ON A/C NOT FOR ALL

B. After the subsequent flight, make sure that the fault does not continue.

[Rev.8 from Aug 2018] 2026.04.04 04:33:42 UTC