PAX Announcement Activation Fault
TASK 35-23-00-810-806-A
PAX Announcement Activation Fault
1. Possible Causes
A. Referenced Information
3. Fault Confirmation
Subtask 35-23-00-710-060-A 4. Fault Isolation
Subtask 35-23-00-810-058-A
Subtask 35-23-00-860-055-A
[Rev.8 from Aug 2018]
2026.04.04 04:33:39 UTC
PAX Announcement Activation Fault
1. Possible Causes
RELAY-PASS INFO (19WR) - wiring
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| AMM 23-32-00-700-001 | Test of the Prerecorded Announcement Operation of the Prerecorded Announcement and Boarding Music (PRAM) Reproducer |
| ASM 233201 | |
| AMM 35-23-00-710-001 | Operational Check of Manual Mask Release |
| ASM 352301 |
Subtask 35-23-00-710-060-A 4. Fault Isolation
Subtask 35-23-00-810-058-A
A. If the test confirms the fault:
(a) Do a check and repair the wiring if necessary between:
Subtask 35-23-00-710-061-A - Do a check of the
RELAY-PASS INFO (19WR) and replace it if necessary ASM 352301.
(a) Do a check and repair the wiring if necessary between:
- RELAY (19WR) connector A/X and CB (1WR)
- RELAY (19WR) connector A/Z and GND
- RELAY (19WR) connector A/2 and REPRODUCER (10RX) connector AB/A11
- RELAY (19WR) connector A/A and GND,
ASM 352301 and ASM 233201.
- Do the test of the prerecorded announcement operation of the prerecorded announcement and boarding music (PRAM) reproducer AMM 23-32-00-700-001.
- Do the trouble shooting procedure related to the maintenance message.
B. Do the test as given in the Para. 3.A.
5. Close-upSubtask 35-23-00-860-055-A
A. Put the aircraft back to its initial configuration.