Power Supply Line Fault
TASK 35-23-00-810-804-A
Power Supply Line Fault
1. Possible Causes
A. Referenced Information
3. Fault Confirmation
Subtask 35-23-00-710-056-A 4. Fault Isolation
Subtask 35-23-00-810-054-A
Subtask 35-23-00-860-053-A
[Rev.8 from Aug 2018]
2026.04.04 04:33:39 UTC
Power Supply Line Fault
1. Possible Causes
RELAY-PWR SPLY (10WR) - wiring
RELAY-TIME DELAY (25WR)
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| AMM 35-23-00-710-001 | Operational Check of Manual Mask Release |
| ASM 352301 |
Subtask 35-23-00-710-056-A 4. Fault Isolation
Subtask 35-23-00-810-054-A
A. If one set of masks (approx. half of the installed masks) drops after approx. 6 seconds:
(a) Do a check and repair the wiring if necessary between:
Subtask 35-23-00-810-060-A - Do a check of the
RELAY-PWR SPLY (10WR) and replace it if necessary ASM 352301.
(a) Do a check and repair the wiring if necessary between:
- RELAY (10WR) connector A/D1 and CB (4WR)
- RELAY (10WR) connector A/D2 RELAY (25WR) connector A/A2
- RELAY (10WR) connector A/C1 and CB (5WR)
- RELAY (10WR) connector A/C2 RELAY (25WR) connector A/A1
- RELAY (10WR) connector A/B1 and CB (6WR)
- RELAY (10WR) connector A/B2 RELAY (25WR) connector A/B1
- RELAY (10WR) connector A/A1 and CB (7WR)
- RELAY (10WR) connector A/A2 RELAY (25WR) connector A/B2,
ASM 352301.
B. If one set of masks (approx. half of the installed masks) does not fall during the test:
(a) Do a check and repair the wiring if necessary between:
Subtask 35-23-00-710-057-A - Do a check of the
RELAY-PWR SPLY (10WR) and replace it if necessary ASM 352301.
- Do a check of the
RELAY-TIME DELAY (25WR) and replace it if necessary ASM 352301.
(a) Do a check and repair the wiring if necessary between:
- RELAY (10WR) connector A/D1 and CB (4WR)
- RELAY (10WR) connector A/D2 and RELAY (25WR) connector A/A2
- RELAY (10WR) connector A/C1 and CB (5WR)
- RELAY (10WR) connector A/C2 and RELAY (25WR) connector A/A1
- RELAY (10WR) connector A/B1 and CB (6WR)
- RELAY (10WR) connector A/B2 and RELAY (25WR) connector A/B1
- RELAY (10WR) connector A/A1 and CB (7WR)
- RELAY (10WR) connector A/A2 and RELAY (25WR) connector A/B2
- RELAY (25WR) connector A/X1 and CB (3WR)
- RELAY (25WR) connector A/X1 and CB (2WR)
- RELAY (25WR) connector A/X2 and GND,
ASM 352301.
C. Do the test as given in the Para. 3.A.
5. Close-upSubtask 35-23-00-860-053-A
A. Put the aircraft back to its initial configuration.