Loss of the ADF1 Display on the CAPT ND Only

TASK 34-53-00-810-824-A
Loss of the ADF1 Display on the CAPT ND Only

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

3. Fault Confirmation
Subtask 34-53-00-740-086-A

A. Test
Do the BITE test of the ADF (system 1) AMM 34-53-00-740-003.

NOTE: Do the test with the EIS DMC selector switch (18WT) on the SWITCHING panel (8VU) at NORM then at CAPT/3.

4. Fault Isolation
Subtask 34-53-00-810-083-A

A. If the test gives the maintenance message DMC1/2/3 (1WT1/2/3)/DDRMI (1FN)/ADF1 (2RP1) with the EIS DMC selector switch at NORM only:

(1) If the fault continues:

remove the DMC1
do a check and repair the wiring between the DMC1 and the first terminal block : for pins AA/8C, 8D of the DMC1 ASM 345301
install the DMC1.

Subtask 34-53-00-810-089-A

B. If the test gives the maintenance message DMC1/2/3 (1WT1/2/3)/DDRMI (1FN)/ADF1 (2RP1) with the EIS DMC selector switch at CAPT/3 only:

(1) If the fault continues:

remove the DMC3
do a check and repair the wiring between the DMC3 and the first terminal block : for pins AA/8C, 8D of the DMC3 ASM 345301
install the DMC3.

Subtask 34-53-00-740-087-A

C. Do the test given in Para. 3.

[Rev.8 from Aug 2018] 2026.04.04 04:33:27 UTC