Loss of the Control Source Data to the ATC/MODE S Transponder 2

TASK 34-52-00-810-812-A
Loss of the Control Source Data to the ATC/MODE S Transponder 2

1. Possible Causes

CTL UNIT-ATC/TCAS [3SH]
XPDR-ATC/MODE S, 2 [1SH2]
wiring of the CONTROL DATA bus from the ATC control unit (3SH) to the ATC/MODE S transponder 2 (1SH2)

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
AMM 34-52-00-740-004	BITE Test of the ATC
ASM 345201
AMM 34-52-12-000-001	Removal of the ATC/TCAS Control Unit
AMM 34-52-12-400-001	Installation of the ATC/TCAS Control Unit
AMM 34-52-33-000-001	Removal of the ATC/Mode S Transponder
AMM 34-52-33-400-001	Installation of the ATC/Mode S Transponder

3. Fault Confirmation
Subtask 34-52-00-740-072-A

A. Test
(1) Do the BITE test of the ATC AMM 34-52-00-740-004.

4. Fault Isolation
Subtask 34-52-00-810-063-C

A. If the BITE test gives the maintenance message ATC CTL PNL(3SH)/ATC2(1SH2) :

(1) If the fault continues:

(a) If the fault continues:

do a check and repair the wiring of the CONTROL DATA bus from the ATC control unit (3SH) to the ATC/MODE S transponder 2 (1SH2) ASM 345201.

Subtask 34-52-00-740-073-A

B. Do the test given in Para. 3.

[Rev.8 from Aug 2018] 2026.04.04 04:33:23 UTC