The ON Legend of the GPWS/LDG FLAP 3 Pushbutton Switch does not come on

TASK 34-48-00-810-824-A
The ON Legend of the GPWS/LDG FLAP 3 Pushbutton Switch does not come on

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
ESPM 2045110
AMM 24-41-00-861-002	Energize the Aircraft Electrical Circuits from the External Power
AMM 24-41-00-862-002	De-energize the Aircraft Electrical Circuits Supplied from the External Power
ASM 344801

3. Fault Confirmation
Subtask 34-48-00-860-059-A

A. Job Set-Up
(1) Aircraft Maintenance Configuration
(a) Energize the aircraft electrical circuits
AMM 24-41-00-861-002.

Subtask 34-48-00-865-054-A

B. Make sure that this(these) circuit breaker(s) is(are) closed:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
122VU	LIGHTING/ANN LT SPLY/XFMR/BUS 1	26LP	X04

Subtask 34-48-00-710-070-A

C. Test
On the GPWS section of panel 21VU, push the GPWS/LDG FLAP 3 pushbutton switch and make sure that the ON legend comes on.

4. Fault Isolation
Subtask 34-48-00-810-076-A

A. If the ON legend of the GPWS/LDG FLAP 3 pushbutton switch stays off:

on the panel 25VU, set the INT LT/ANN LT switch to TEST and do a check to see if the ON legend comes on:

(1) If the ON legend comes on:

do a check and repair the wiring of the GPWS/LDG FLAP 3 pushbutton switch (13WZ) from pin A/A1 to the ground point ASM 344801.

(2) If the ON legend does not come on:

(a) If the fault continues:

do a check and repair the wiring of the GPWS/LDG FLAP 3 pushbutton switch (13WZ) from pin A/4 to pin A/A3 ASM 344801.

Subtask 34-48-00-710-071-A

B. Do the test given in Para. 3.C.

5. Close-up
Subtask 34-48-00-860-060-A

A. Put the aircraft back to its initial configuration.
(1) De-energize the aircraft electrical circuits
AMM 24-41-00-862-002.

[Rev.8 from Aug 2018] 2026.04.04 04:33:16 UTC