W DOC AIRBUS | TSM A320F

Loss of the ATC1 and ATC2 Data to the TCAS


TASK 34-43-00-810-822-A
Loss of the ATC1 and ATC2 Data to the TCAS


1. Possible Causes
  • CTL UNIT-ATC/TCAS [3SH]
  • CMPTR-TCAS [1SG]
  • XPDR-ATC/MODE S, 1 [1SH1]
  • XPDR-ATC/MODE S, 2 [1SH2]
  • wiring of the XT COORD-1 bus from the ATC/Mode S transponder 1 (1SH1) to the TCAS computer (1SG)
  • wiring of the XT COORD-2 bus from the ATC/Mode S transponder 2 (1SH2) to the TCAS computer (1SG)
2. Job Set-up Information
 A. Referenced Information
REFERENCE
DESIGNATION
AMM 34-43-00-740-001
BITE Test of the TCAS
ASM 344301
AMM 34-43-34-000-001
Removal of the TCAS Computer
AMM 34-43-34-400-001
Installation of the TCAS Computer
AMM 34-52-00-740-004
BITE Test of the ATC
AMM 34-52-12-000-001
Removal of the ATC/TCAS Control Unit
AMM 34-52-12-400-001
Installation of the ATC/TCAS Control Unit
AMM 34-52-33-000-001
Removal of the ATC/Mode S Transponder
AMM 34-52-33-400-001
Installation of the ATC/Mode S Transponder
3. Fault Confirmation
Subtask 34-43-00-740-086-A
A. Test
   (1) Do the BITE test of the TCAS AMM 34-43-00-740-001.
4. Fault Isolation
Subtask 34-43-00-810-072-A ** ON A/C NOT FOR ALL
A. If the test gives the maintenance messages ATC1 (1SH1)/TCAS (1SG) and ATC2 (1SH2)/TCAS (1SG):
   (1) If the test gives a maintenance message:
  • Do the trouble shooting procedure related to the maintenance message.
   (2) If the test does not give a maintenance message:
     (a) If the fault continues:
     (b) If the fault continues:
       1 If the fault continues:
  • do a check and repair the wiring of the XT COORD-1 bus from the ATC/Mode S transponder 1 (1SH1) to the TCAS computer (1SG): pins AA/5G, 5H to pins AE/14F, 14G
  • do a check and repair the wiring of the XT COORD-2 bus from the ATC/Mode S transponder 2 (1SH2) to the TCAS computer (1SG): pins AA/5G, 5H to pins AE/14H, 14J
    ASM 344301.
Subtask 34-43-00-810-072-B ** ON A/C NOT FOR ALL
A. If the test gives the maintenance message ATC1(1SH1) + ATC2(1SH2)/TCAS(1SG):
   (1) If the test gives a maintenance message:
  • Do the trouble shooting procedure related to the maintenance message.
   (2) If the test does not give a maintenance message:
     (a) If the fault continues:
     (b) If the fault continues:
       1 If the fault continues:
  • do a check and repair the wiring of the XT COORD-1 bus from the ATC/Mode S transponder 1 (1SH1) to the TCAS computer (1SG): pins AA/5G, 5H to pins AE/14F, 14G
  • do a check and repair the wiring of the XT COORD-2 bus from the ATC/Mode S transponder 2 (1SH2) to the TCAS computer (1SG): pins AA/5G, 5H to pins AE/14H, 14J
    ASM 344301.
Subtask 34-43-00-740-087-A
B. Do the test given in Para. 3.
[Rev.8 from Aug 2018] 2026.04.04 04:33:13 UTC