Loss of the Altitude Bus 2 of the RA Transceiver 2 Identified by the EIS2

TASK 34-42-00-810-816-A
Loss of the Altitude Bus 2 of the RA Transceiver 2 Identified by the EIS2

1. Possible Causes

XCVR-RA, 2 [2SA2]
wiring of the ALTITUDE BUS 2 from the RA transceiver 2 (2SA2) to the first terminal block

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
AMM 31-60-00-740-002	Perform Electronic Instrument System (EIS) Input Test
AMM 31-60-00-740-007	GROUND SCANNING Test of the DMC
ASM 344202
AMM 34-42-33-000-001	Removal of the Radio Altimeter Transceiver
AMM 34-42-33-400-001	Installation of the Radio Altimeter Transceiver

3. Fault Confirmation
Subtask 34-42-00-865-065-A

A. Make sure that this(these) circuit breaker(s) is(are) closed:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
121VU	COM NAV/RAD ALTM/2	1SA2	K12

Subtask 34-42-00-740-072-A ** ON A/C NOT FOR ALL

B. Test
(1) Do the EIS input test AMM 31-60-00-740-002.

Subtask 34-42-00-740-072-B ** ON A/C NOT FOR ALL

B. Test
(1) Do the Ground Scanning Test of the DMC AMM 31-60-00-740-007

4. Fault Isolation
Subtask 34-42-00-810-067-A ** ON A/C NOT FOR ALL

A. If the test gives the maintenance message DMC2 : NO RA2 DATA:

(1) If the fault continues:

do a check and repair the wiring of the ALTITUDE BUS 2 from the RA transceiver 2 (2SA2) to the first terminal block ASM 344202.

Subtask 34-42-00-810-067-B ** ON A/C NOT FOR ALL

A. If the test gives the maintenance message RA2(2SA2)/DMC2(1WT2):

(1) If the fault continues:

do a check and repair the wiring of the ALTITUDE BUS 2 from the RA transceiver 2 (2SA2) to the first terminal block ASM 344202.

Subtask 34-42-00-740-073-A

B. Do the test given in Para. 3.B.

[Rev.8 from Aug 2018] 2026.04.04 04:33:08 UTC