Loss of the Altitude Bus 2 of the RA Transceiver 2 Identified by the CFDS

TASK 34-42-00-810-814-A
Loss of the Altitude Bus 2 of the RA Transceiver 2 Identified by the CFDS

1. Possible Causes

XCVR-RA, 2 [2SA2]
wiring of the ALTITUDE BUS 2 from the RA transceiver 2 (2SA2) to the first terminal block

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
AMM 31-32-00-869-002	Procedure for the Class 3 Fault Reading
ASM 344202
AMM 34-42-33-000-001	Removal of the Radio Altimeter Transceiver
AMM 34-42-33-400-001	Installation of the Radio Altimeter Transceiver

3. Fault Confirmation
Subtask 34-42-00-865-063-A

A. Make sure that this(these) circuit breaker(s) is(are) closed:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
121VU	COM NAV/RAD ALTM/2	1SA2	K12

Subtask 34-42-00-740-068-A

B. Test
On the CFDS MENU page, get access to the AVIONICS STATUS page AMM 31-32-00-869-002.

4. Fault Isolation
Subtask 34-42-00-810-065-A

A. If the test gives the maintenance message NO RA2 DATA:

(1) If the fault continues:

do a check and repair the wiring of the ALTITUDE BUS 2 from the RA transceiver 2 (2SA2) to the first terminal block ASM 344202.

Subtask 34-42-00-740-069-A

B. Do the test given in Para. 3.B.

[Rev.8 from Aug 2018] 2026.04.04 04:33:08 UTC