Loss of Qualifiers B1/B2 on the Weather Radar Transceiver 1
TASK 34-41-00-810-850-A
Loss of Qualifiers B1/B2 on the Weather Radar Transceiver 1
1. Possible Causes
A. Referenced Information
3. Fault Confirmation
Subtask 34-41-00-740-138-A ** ON A/C NOT FOR ALL 4. Fault Isolation
Subtask 34-41-00-810-113-A ** ON A/C NOT FOR ALL
Subtask 34-41-00-860-050-A ** ON A/C NOT FOR ALL
[Rev.8 from Aug 2018]
2026.04.04 04:33:07 UTC
Loss of Qualifiers B1/B2 on the Weather Radar Transceiver 1
1. Possible Causes
- XCVR-WEATHER RADAR, 1 [1SQ1]
- wiring between the weather radar transceiver 1 and the EIU-1
- wiring between the weather radar transceiver 1 and the EIU-2
- diode module 1805VD
- diode module 1802VD
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| ASM 344100 | |
| AMM 34-41-00-740-002 | BITE Test of the Weather Radar |
| AMM 34-41-33-000-004 | Removal of the Weather Radar Transceiver |
| AMM 34-41-33-400-003 | Installation of the Weather Radar Transceiver |
Subtask 34-41-00-740-138-A ** ON A/C NOT FOR ALL 4. Fault Isolation
Subtask 34-41-00-810-113-A ** ON A/C NOT FOR ALL
A. If the test gives the maintenance message QUALIFIER B1/2WXR1(1SQ1):
(1) Replace the XCVR-WEATHER RADAR, 1 [1SQ1] AMM 34-41-33-000-004 and AMM 34-41-33-400-003.
(2) If the fault continues:
Subtask 34-41-00-740-139-A ** ON A/C NOT FOR ALL (1) Replace the XCVR-WEATHER RADAR, 1 [1SQ1] AMM 34-41-33-000-004 and AMM 34-41-33-400-003.
(2) If the fault continues:
- do a check and repair the wiring between the weather radar transceiver 1 and the EIU-1 ASM 344100 : pin AB/11B and pin AB/7A
- do a check and repair the wiring between the weather radar transceiver 1 and the EIU-2 ASM 344100 : pin AB/12B and pin AB/7A.
- do a check and repair the diode module 1805VD : pin A/25 and pin A/10
- do a check and repair the diode module 1802VD : pin A/44 and pin A/43.
- refer to the trouble shooting procedures of the EIUs.
B. Do the test given in Para. 3.
5. Close-upSubtask 34-41-00-860-050-A ** ON A/C NOT FOR ALL
A. Put the Aircraft back to its Initial Configuration