Loss of the IR Interface between the WXR transceiver 1 and the ADIRU 1 + 3
TASK 34-41-00-810-836-A
Loss of the IR Interface between the WXR transceiver 1 and the ADIRU 1 + 3
1. Possible Causes
A. Referenced Information
3. Fault Confirmation
Subtask 34-41-00-740-110-A
Subtask 34-41-00-810-095-A
[Rev.8 from Aug 2018]
2026.04.04 04:33:06 UTC
Loss of the IR Interface between the WXR transceiver 1 and the ADIRU 1 + 3
1. Possible Causes
- XCVR-WEATHER RADAR, 1 [1SQ1]
- ADIRU-1 [1FP1]
- ADIRU-3 [1FP3]
- wiring from the ADIRU1 to the weather radar transceiver 1
- wiring from the ADIRU3 to the weather radar transceiver 1
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| AMM 34-12-34-000-001 | Removal of the ADIRU |
| AMM 34-12-34-400-001 | Installation of the ADIRU |
| AMM 34-41-00-740-002 | BITE Test of the Weather Radar |
| ASM 344101 | |
| AMM 34-41-33-000-004 | Removal of the Weather Radar Transceiver |
| AMM 34-41-33-400-003 | Installation of the Weather Radar Transceiver |
Subtask 34-41-00-740-110-A
A. Test
4. Fault IsolationNOTE: Do the test that follows with the ATT HDG selector switch (13FP), on the SWITCHING panel 8VU, at NORM then at CAPT ON 3.
Do the BITE test of the weather radar AMM 34-41-00-740-002. Subtask 34-41-00-810-095-A
A. If the test gives the maintenance message ADIRU1+3(1FP1+3) BUS IR/WXR1(1SQ1):
Subtask 34-41-00-740-111-A - replace the XCVR-WEATHER RADAR, 1 [1SQ1] AMM 34-41-33-000-004 and AMM 34-41-33-400-003.
- swap the ADIRU-1 [1FP1] and the ADIRU2 AMM 34-12-34-000-001 and AMM 34-12-34-400-001.
- replace the ADIRU that you installed on side 2.
- swap back the ADIRU1 and the ADIRU2
- swap the ADIRU-3 [1FP3] and the ADIRU2 AMM 34-12-34-000-001 and AMM 34-12-34-400-001.
- replace the ADIRU that you installed on side 2.
- remove the weather radar transceiver 1
- remove the ADIRU1 and the ADIRU3
- do a check and repair the wiring from the ADIRU1 to the weather radar transceiver 1 : from pins AB/10C, 11C of the ADIRU1 to pins AB/11J, 12J of the weather radar transceiver 1 ASM 344101 and the wiring from the ADIRU3 to the weather radar transceiver 1 : from pins AB/10C, 11C of the ADIRU3 to pins AB/12G, 13G of the weather radar transceiver 1.
- install the weather radar transceiver 1
- install the ADIRU1 and the ADIRU3.
B. Do the test given in Para. 3.