Loss of the ILS2 Test Display

TASK 34-36-00-810-835-A
Loss of the ILS2 Test Display

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
AMM 31-63-34-000-001	Removal of the DMC
AMM 31-63-34-400-001	Installation of the DMC
AMM 34-36-00-740-003	BITE Test of the MMR
ASM 343601
AMM 34-36-31-000-001	Removal of the ILS Receiver
AMM 34-36-31-400-001	Installation of the ILS Receiver

3. Fault Confirmation
Subtask 34-36-00-740-090-B

A. Test
Do the BITE test of the MMR2 AMM 34-36-00-740-003.

4. Fault Isolation
Subtask 34-36-00-810-092-B

A. If the test gives the maintenance message DMC2(1WT2)/MMR2(40RT2):

(1) If the fault continues:

(a) If the fault continues:

do a check and repair the wiring from the MMR2 to the DMC2 for the ILS RECEIVER OUT PORT 2 bus from pins AB/1G, 1H to pins AA/6J, 6K ASM 343601

Subtask 34-36-00-740-091-A

B. Do the test given in Para. 3.

[Rev.8 from Aug 2018] 2026.04.04 04:33:00 UTC