Display of an Operational Warning on the ECAM
TASK 34-14-00-810-978-A
Display of an Operational Warning on the ECAM
1. Possible Causes
2. Job Set-up Information
A. Referenced Information
3. Fault Confirmation
Subtask 34-14-00-740-351-A ** ON A/C NOT FOR ALL
Subtask 34-14-00-810-237-A ** ON A/C NOT FOR ALL
[Rev.8 from Aug 2018]
2026.04.04 04:32:53 UTC
Display of an Operational Warning on the ECAM
1. Possible Causes
2. Job Set-up Information
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| AMM 34-10-00-860-004 | IR Alignment Procedure |
Subtask 34-14-00-740-351-A ** ON A/C NOT FOR ALL
A. Test
4. Fault Isolation- Not applicable, no confirmation test is necessary.
Subtask 34-14-00-810-237-A ** ON A/C NOT FOR ALL
A. If the ECAM warning message IR NOT ALIGNED is shown:
- Do again the IR alignment procedure for the three ADIRUs AMM 34-10-00-860-004.
NOTE: Do not move the aircraft during the IR Alignment procedure.