Invalid GPS PRESENT Pin-Programming on the ADIRU2

TASK 34-14-00-810-955-A
Invalid GPS PRESENT Pin-Programming on the ADIRU2

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
ASM 341202
AMM 34-12-34-000-001	Removal of the ADIRU
AMM 34-12-34-400-001	Installation of the ADIRU
AMM 34-14-00-740-001	Interface Test of the IR
AMM 34-14-00-740-002	Read CFDIU for IR CURRENT STATUS

3. Fault Confirmation
Subtask 34-14-00-740-314-A ** ON A/C NOT FOR ALL

A. Test
(1) Do the Interface test of the IR (system 2) AMM 34-14-00-740-001.

4. Fault Isolation
Subtask 34-14-00-810-211-A ** ON A/C NOT FOR ALL

A. If the test gives the maintenance message WRG : GPS PRESENT PIN PROG:

read the CFDIU for the CURRENT STATUS of the IR2 (page 1) AMM 34-14-00-740-002
compare the CURRENT STATUS of the IR2 with the state of the GPS PRESENT programming pins AB/7D, 10D given in the ASM ASM 341202
do a check of the GPS PRESENT pin-programming on the rack connector.

(1) If the pin-programming is incorrect:

(2) If the pin-programming is correct:

Subtask 34-14-00-740-324-A ** ON A/C NOT FOR ALL

B. Do the test given in Para. 3.

[Rev.8 from Aug 2018] 2026.04.04 04:32:52 UTC