W DOC AIRBUS | TSM A320F

Failure of the ADR1 Aircraft-Identification Pin-Programming


TASK 34-13-00-810-947-A
Failure of the ADR1 Aircraft-Identification Pin-Programming


1. Possible Causes
  • ADIRU-1 [1FP1]
  • wiring of the rack connector
2. Job Set-up Information
 A. Referenced Information
REFERENCE
DESIGNATION
ASM 341141
AMM 34-12-34-000-001
Removal of the ADIRU
AMM 34-12-34-400-001
Installation of the ADIRU
AMM 34-13-00-740-002
INTERFACE TEST of the ADR
3. Fault Confirmation
Subtask 34-13-00-740-263-A
A. Test
Do the Interface test of the ADR (system 1) AMM 34-13-00-740-002.
4. Fault Isolation
Subtask 34-13-00-810-200-A ** ON A/C NOT FOR ALL
A. If the test gives the maintenance message WRG: ACFT TYPE PIN PROG/ ADIRU1 (1FP1):
  • remove the ADIRU-1 [1FP1] AMM 34-12-34-000-001
  • do a check of the aircraft identification-code programming-pins AA/1E, 1F, 1G, 1H, 1J, 1K, 2E, 4A, on the rack connector
  • compare the state of the aircraft identification-code pin-programming with the state given in the ASM ASM 341141.
   (1) If the pin-programming is incorrect:
   (2) If the pin-programming is correct:
  • install a new ADIRU1.
Subtask 34-13-00-810-200-B ** ON A/C NOT FOR ALL
A. If the test gives the maintenance message WRG: ACFT IDENT PIN PROG:
  • remove the ADIRU-1 [1FP1] AMM 34-12-34-000-001
  • do a check of the aircraft identification-code programming-pins AA/1E, 1F, 1G, 1H, 1J, 1K, 2E, 4A, on the rack connector
  • compare the state of the aircraft identification-code pin-programming with the state given in the ASM ASM 341141.
   (1) If the pin-programming is incorrect:
   (2) If the pin-programming is correct:
  • install a new ADIRU1.
Subtask 34-13-00-740-264-A
B. Do the test given in Para. 3.
[Rev.8 from Aug 2018] 2026.04.04 04:32:30 UTC