Loss of the ADM Data to the ADR2
TASK 34-13-00-810-939-A
Loss of the ADM Data to the ADR2
1. Possible Causes
2. Job Set-up Information
A. Referenced Information
3. Fault Confirmation
Subtask 34-13-00-710-154-A
Subtask 34-13-00-810-188-A
Subtask 34-13-00-860-065-A
[Rev.8 from Aug 2018]
2026.04.04 04:32:30 UTC
Loss of the ADM Data to the ADR2
1. Possible Causes
2. Job Set-up Information
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| AMM 34-10-00-860-002 | ADIRS Start Procedure |
| AMM 34-10-00-860-005 | ADIRS Stop Procedure |
| AMM 34-11-17-000-001 | Removal of the Air Data Module |
| AMM 34-11-17-400-001 | Installation of the Air Data Module |
| AMM 34-13-00-740-002 | INTERFACE TEST of the ADR |
Subtask 34-13-00-710-154-A
A. Test
Not applicable, you cannot confirm this fault on the ground.
4. Fault IsolationNot applicable, you cannot confirm this fault on the ground.
Subtask 34-13-00-810-188-A
A. If the fault only occurs during the flight:
Subtask 34-13-00-810-189-A - do the Interface test of the ADR (system 2) AMM 34-13-00-740-002.
- do the trouble shooting procedure related to the maintenance message.
- no maintenance action is necessary.
B. If the fault continues on the ground:
5. Close-up- replace the ADM-R TOTAL PRESSURE [19FP2] AMM 34-11-17-000-001 and AMM 34-11-17-400-001
- do the ADIRS start procedure AMM 34-10-00-860-002.
- replace the ADM-L STATIC PRESSURE [19FP7] AMM 34-11-17-000-001 and AMM 34-11-17-400-001
- do the ADIRS start procedure.
- replace the ADM-R STATIC PRESSURE [19FP6] .
Subtask 34-13-00-860-065-A