Failure of the Angle of Attack Sensor 1

TASK 34-11-00-810-899-A
Failure of the Angle of Attack Sensor 1

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
AMM 34-11-19-000-001	Removal of the Angle of Attack Sensor
AMM 34-11-19-400-001	Installation of the Angle of Attack Sensor

3. Fault Confirmation
Subtask 34-11-00-700-059-A ** ON A/C NOT FOR ALL

A. Test
Not Applicable

4. Fault Isolation
Subtask 34-11-00-810-227-A ** ON A/C NOT FOR ALL

A. If the maintenance message AOA SENSOR (3FP1) is shown:

replace the SENSOR-ANGLE OF ATTACK, 1 [3FP1] AMM 34-11-19-000-001 and AMM 34-11-19-400-001.

[Rev.8 from Aug 2018] 2026.04.04 04:32:19 UTC