Failure of EPSU 15WL
TASK 33-51-00-810-872-A
Failure of EPSU 15WL
1. Possible Causes
A. Referenced Information
3. Fault Confirmation
Subtask 33-51-00-810-202-A ** ON A/C NOT FOR ALL
Subtask 33-51-00-860-126-A ** ON A/C NOT FOR ALL
[Rev.8 from Aug 2018]
2026.04.04 04:32:12 UTC
Failure of EPSU 15WL
1. Possible Causes
- EPSU [15WL]
- signs and lights
- wiring
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| AMM 33-51-00-710-001 | Operational Test of the Emergency Lights |
| ASM 335101 | |
| ASM 335104 | |
| AMM 33-51-38-000-001 | Removal of the Emergency Power-Supply Unit (EPSU) |
| AMM 33-51-38-400-001 | Installation of the Emergency Power-Supply Unit (EPSU) |
CAUTION:
DO NOT USE THE TEACH-IN PROCEDURE AS AN ALTERNATIVE FOR TROUBLESHOOTING. A TEACH-IN PROCEDURE IS NOT A RESET PROCEDURE. BEFORE YOU DO A TEACH-IN PROCEDURE, MAKE SURE THAT YOU CORRECTED ALL FAILURES. IF YOU DO NOT OBEY THIS, FAILURES CAN CAUSE A MALFUNCTION OF THE CABIN EMERGENCY LIGHTING SYSTEM.
Subtask 33-51-00-710-187-A ** ON A/C NOT FOR ALL 4. Fault IsolationSubtask 33-51-00-810-202-A ** ON A/C NOT FOR ALL
A. If the test gives a different maintenance message, do the trouble shooting procedure related to the maintenance message.
Subtask 33-51-00-810-203-A ** ON A/C NOT FOR ALL B. If the operational test gives the maintenance message:
EPSU(15WL)MID L:
Subtask 33-51-00-710-188-A ** ON A/C NOT FOR ALL EPSU(15WL)MID L:
- Replace the EPSU [15WL] AMM 33-51-38-000-001 and AMM 33-51-38-400-001.
- Do a check of all connected signs and lights for a short-circuit and replace if necessary ASM 335101 and ASM 335104,
- If you find one or more defective signs and lights, replace the EPSU [15WL] AMM 33-51-38-000-001 and AMM 33-51-38-400-001.
- Do a check for a short to ground and repair the wiring if necessary ASM 335101 and ASM 335104:
from EPSU (15WL) pin E to the connector(s) of the related signs and lights,
from EPSU (15WL) pin F to the connector(s) of the related signs and lights,
from EPSU (15WL) pin G to the connector(s) of the related signs and lights,
from EPSU (15WL) pin H to the connector(s) of the related signs and lights,
from EPSU (15WL) pin J to the connector(s) of the related signs and lights,
from EPSU (15WL) pin N to the connector(s) of the related signs and lights,
from EPSU (15WL) pin R to the connector(s) of the related signs and lights,
from EPSU (15WL) pin T to the connector(s) of the related signs and lights,
from EPSU (15WL) pin -B to the connector(s) of the related signs and lights,
from EPSU (15WL) pin -C to the connector(s) of the related signs and lights,
from EPSU (15WL) pin -H to the connector(s) of the related signs and lights,
from EPSU (15WL) pin -J to the connector(s) of the related signs and lights, - If you find a short to ground in the wiring, replace the EPSU [15WL] AMM 33-51-38-000-001 and AMM 33-51-38-400-001.
- Do a check and repair the wiring if necessary ASM 335101:
from EPSU (15WL) pin -I to DEU-B (300RH4) pin B29,
from EPSU (15WL) pin -P to DEU-B (300RH4) pin B31,
from EPSU (15WL) pin X to DEU-B (300RH4) pin B30,
from EPSU (15WL) pin L to GND,
from EPSU (15WL) pin M to GND,
from EPSU (15WL) pin U to GND,
from EPSU (15WL) pin -R to GND,
from EPSU (15WL) pin -M to GND.
C. Do the test given in Para. 3.
5. Close-upSubtask 33-51-00-860-126-A ** ON A/C NOT FOR ALL
A. Put the aircraft back to its initial configuration.