EPSU 14WL does not have a Test Result available
TASK 33-51-00-810-867-A
EPSU 14WL does not have a Test Result available
1. Possible Causes
A. Referenced Information
3. Fault Confirmation
Subtask 33-51-00-810-193-A ** ON A/C NOT FOR ALL
Subtask 33-51-00-860-122-A ** ON A/C NOT FOR ALL
[Rev.8 from Aug 2018]
2026.04.04 04:32:12 UTC
EPSU 14WL does not have a Test Result available
1. Possible Causes
- wiring
- EPSU [14WL]
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| AMM 33-51-00-710-003 | Check of the Battery Capacity |
| ASM 335101 | |
| AMM 33-51-38-000-001 | Removal of the Emergency Power-Supply Unit (EPSU) |
| AMM 33-51-38-400-001 | Installation of the Emergency Power-Supply Unit (EPSU) |
CAUTION:
DO NOT USE THE TEACH-IN PROCEDURE AS AN ALTERNATIVE FOR TROUBLESHOOTING. A TEACH-IN PROCEDURE IS NOT A RESET PROCEDURE. BEFORE YOU DO A TEACH-IN PROCEDURE, MAKE SURE THAT YOU CORRECTED ALL FAILURES. IF YOU DO NOT OBEY THIS, FAILURES CAN CAUSE A MALFUNCTION OF THE CABIN EMERGENCY LIGHTING SYSTEM.
Subtask 33-51-00-710-179-A ** ON A/C NOT FOR ALL 4. Fault IsolationSubtask 33-51-00-810-193-A ** ON A/C NOT FOR ALL
A. If the test gives a different maintenance message, do the trouble shooting procedure related to the maintenance message.
Subtask 33-51-00-810-194-A ** ON A/C NOT FOR ALL B. If the operational test gives the maintenance message:
(1) NO TEST RESULT AVAIL/EPSU(14WL)MID R:
EPSU 14WL pin -I and DEU-B 300RH4 pin B25.
EPSU 14WL pin -P and DEU-B 300RH4 pin B27.
EPSU 14WL pin X and DEU-B 300RH4 pin B26 ASM 335101.
(b) If the fault continues:
Subtask 33-51-00-710-180-A ** ON A/C NOT FOR ALL (1) NO TEST RESULT AVAIL/EPSU(14WL)MID R:
- Get access to EPSU 14WL AMM 33-51-38-000-001.
EPSU 14WL pin -I and DEU-B 300RH4 pin B25.
EPSU 14WL pin -P and DEU-B 300RH4 pin B27.
EPSU 14WL pin X and DEU-B 300RH4 pin B26 ASM 335101.
(b) If the fault continues:
- Replace the EPSU [14WL] AMM 33-51-38-000-001 and AMM 33-51-38-400-001.
C. Do the test given in Para. 3.
5. Close-upSubtask 33-51-00-860-122-A ** ON A/C NOT FOR ALL
A. Put the aircraft back to its initial configuration.