Failure of the Taxi and Take off Lights
TASK 33-46-00-810-803-A
Failure of the Taxi and Take off Lights
1. Possible Causes
2. Job Set-up Information
A. Referenced Information
3. Fault Confirmation
Subtask 33-46-00-710-054-A
Subtask 33-46-00-810-052-A
[Rev.8 from Aug 2018]
2026.04.04 04:31:59 UTC
Failure of the Taxi and Take off Lights
1. Possible Causes
2. Job Set-up Information
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| TSM TASK 24-00-00-810-803-A | Circuit Breaker Tripped and/or C/B TRIPPED Warning |
| AMM 32-31-71-000-001 | Removal of the LGCIU |
| AMM 32-31-71-400-001 | Installation of the LGCIU |
| AMM 33-43-00-710-001 | Operational Test of the Runway Turnoff Lights |
| ASM 334301 | |
| AMM 33-46-00-710-001 | Operational Test of the Taxi and Take Off Lights |
| ASM 334601 | |
| AIPC 334608 |
Subtask 33-46-00-710-054-A
A. Test
Do the operational test of the taxi and take off lights AMM 33-46-00-710-001.
Then do the operational test of the runway turn off lights AMM 33-43-00-710-001.
4. Fault IsolationDo the operational test of the taxi and take off lights AMM 33-46-00-710-001.
Then do the operational test of the runway turn off lights AMM 33-43-00-710-001.
Subtask 33-46-00-810-052-A
A. If during the operational tests, only the taxi and take off lights do not operate correctly:
Subtask 33-46-00-810-053-A - Replace the
SW-EXT LT/NOSE (4LR) AIPC 334608.
B. If, during the operational tests, the integral lighting of the taxi, take off and runway turn off lights do not operate correctly:
Subtask 33-46-00-710-055-A - Do a check of the circuit breaker LIGHTING/EXT LT/TAXI AND TAKE OFF/CTL (2LR) status.
- Do a check for a ground signal at the LGCIU-2 (5GA2) pin AB/11K.
- Replace the LGCIU-2 [5GA2] AMM 32-31-71-000-001 and AMM 32-31-71-400-001.
- Do a check for 28VDC at the pin 3 of the circuit breaker LIGHTING/EXT LT/TAXI AND TAKE OFF/CTL (2LR).
- Replace the C/B-LIGHTING/EXT LT/TAXI AND TAKE OFF/CTL [2LR] .
- Do a check of the wiring between:
. Pin AB/11K of the LGCIU-2 (5GA2) and the first terminal block ASM 334601
. The circuit breaker (2LR) and pin AB/11K of the LGCIU2 (5GA2) through the related switches (2LC) and (4LR) and the related power supply relays (6LC), (5LR) and (6LR) ASM 334601 and ASM 334301.
- Repair the above wiring.
- Repair the wiring from the circuit breaker (2LR) to the first terminal block ASM 334601.
- Do the procedure (Ref. TSM TASK 24-00-00-810-803).
- Replace the C/B-LIGHTING/EXT LT/TAXI AND TAKE OFF/CTL [2LR] .
C. Do the tests given in Para. 3.