W DOC AIRBUS | TSM A320F

Cabin Attendant Work Light Fault

TASK 33-27-00-810-801-A
Cabin Attendant Work Light Fault

1. Possible Causes
  • WORK LIGHT
  • STA PISA [203LZ]
  • STA PISA [212LZ]
  • lamp
  • PUSHBUTTON SWITCH
  • wiring
  • SWITCH PANEL (2062VU)
  • SWITCH PANEL (2063VU)
  • PWR UNIT
  • FAP [120RH]
  • RELAY-SYS PWR SPLY [2LZ]
2. Job Set-up Information
 A. Referenced Information
REFERENCE
DESIGNATION
AMM 23-73-00-740-005
BITE-Test of the Cabin Intercommunication Data System (CIDS) through the CFDS
AMM 23-73-15-000-001
Removal of the Light Module
AMM 23-73-15-400-001
Installation of the Light Module
AMM 33-27-00-710-001
Operational Test of the Cabin Attendant Work-Light
ASM 332701
AMM 33-27-12-000-001
Removal of the Cabin Attendant Work-Lights
AMM 33-27-12-400-001
Installation of the Cabin Attendant Work-Lights
AMM 33-27-38-000-001
Removal of the Power Unit for the Cabin Attendant Work-Light
AMM 33-27-38-400-001
Installation of the Power Unit for the Cabin Attendant Work-Light
AMM 33-27-41-000-001
Removal of the Stand-Alone Passenger Interface and Supply Adapter (StA-PISA)
AMM 33-27-41-400-001
Installation of the Stand-Alone Passenger Interface and Supply Adapter (StA-PISA)
3. Fault Confirmation
Subtask 33-27-00-710-050-A
A. Do the operational test of the cabin-attendant work lights AMM 33-27-00-710-001.
Subtask 33-27-00-710-051-A
B. Do the BITE-test of the Cabin Intercommunication Data-System (CIDS) AMM 23-73-00-740-005.
4. Fault Isolation
Subtask 33-27-00-810-056-A ** ON A/C NOT FOR ALL
A. If the operational test gives the maintenance message WORK LIGHT FWD 1,2,L,R
or WORK LIGHT MID 1,2,L,R or WORK LIGHT AFT 1,2,L,R:

   (1) If the fault continues:
Subtask 33-27-00-810-057-A ** ON A/C NOT FOR ALL
B. If the operational test gives the maintenance message WORK LIGHT PCB FWD 1,2,L,R
or WORK LIGHT PCB MID 1,2,L,R or WORK LIGHT PCB AFT 1,2,L,R:

   (1) If the fault continues:
Subtask 33-27-00-810-058-A ** ON A/C NOT FOR ALL
C. If the operational test gives the maintenance message POWER PCB FWD 1,2,L,R
or POWER PCB 1,2,L,R or POWER PCB AFT 1,2,L,R:

Subtask 33-27-00-810-056-B ** ON A/C NOT FOR ALL
D. If the operational test gives the maintenance message WORK LT <APPL. AREA> ATTXXX:

   (1) If the fault continues:
Subtask 33-27-00-810-057-B ** ON A/C NOT FOR ALL
E. If the operational test gives the maintenance message WORK LT PCB <APPL. AREA> ATTXXX or WORK LT PCB <APPL. AREA> ATTXXX / DEU A (200RHXX):

   (1) If the fault continues:
Subtask 33-27-00-810-058-B ** ON A/C NOT FOR ALL
F. If the operational test gives the maintenance message PISA (602RH) - WORK LT <APPL. AREA> ATTNXX or PISA (602RH) / WORK LT <APPL. AREA> ATTNXX:

Subtask 33-27-00-810-050-A
G. If the test gives a different maintenance message, do the trouble shooting procedure related to the maintenance message.
Subtask 33-27-00-810-051-A ** ON A/C NOT FOR ALL
H. If the operational test gives no maintenance message, but one of the work lights does not come on:
   (1) If the fault continues:
  • do a check of the related PUSHBUTTON SWITCH and replace it if necessary.
   (2) If the fault continues:
   (3) If the fault continues:
  • do a check and repair the wiring between:
    PWR UNIT (3LZ) conn. A/D and L FWD ATTND SEAT (2063VU1) pin 1,
    PWR UNIT (3LZ) conn. A/G and L FWD ATTND SEAT (2063VU1) pin 3,
    GND and L FWD ATTND SEAT (2063VU1) pin 2,
    PWR UNIT (13LZ) conn. A/F and R AFT ATTND SEAT (2062VU2) pin 1,
    GND and R AFT ATTND SEAT (2062VU2) pin 2,
    PWR UNIT (12LZ) conn. A/F and L AFT ATTND SEAT (2062VU1) pin 1,
    GND and L AFT ATTND SEAT (2062VU1) pin 2 ASM 332701.
Subtask 33-27-00-810-054-A ** ON A/C NOT FOR ALL
I. If the operational test gives no maintenance message, but the work light does not come on when you push the pushbutton switch:
   (1) If the fault continues:
  • do a check of the related PUSHBUTTON SWITCH and replace it if necessary ASM 332701.
   (2) If the fault continues:
   (3) If the fault continues:
  • do a check and repair the wiring between:
    PWR UNIT (3LZ) conn. A/D and L FWD ATTND SEAT (2063VU1) pin 1,
    PWR UNIT (3LZ) conn. A/G and L FWD ATTND SEAT (2063VU1) pin 3,
    GND and L FWD ATTND SEAT (2063VU1) pin 2,
    PWR UNIT (13LZ) conn. A/F and R AFT ATTND SEAT (2062VU2) pin 1,
    GND and R AFT ATTND SEAT (2062VU2) pin 2,
    PWR UNIT (12LZ) conn. A/F and L AFT ATTND SEAT (2062VU1) pin 1,
    GND and L AFT ATTND SEAT (2062VU1) pin 2 ASM 332701.
Subtask 33-27-00-810-051-B ** ON A/C NOT FOR ALL
J. If the operational test gives no maintenance message and one of the work lights does not come on:
   (1) If the fault continues:
  • do a check of the related PUSHBUTTON SWITCH and replace it if necessary.
   (2) If the fault continues:
   (3) If the fault continues:
  • do a check and repair the wiring between:
    STA PISA [203LZ] conn. 6 and L FWD ATTND SEAT (2063VU1) pin 1,
    STA PISA [203LZ] conn. 8 and K FWD ATTND SEAT (2063VU1) pin 3,
    STA PISA [203LZ] conn. 37 and M FWD ATTND SEAT (2063VU1) pin 2,
    STA PISA [212LZ] conn. 6 and AFT ATTND SEAT (2062VU1) pin 1,
    STA PISA [212LZ] conn. 36 and AFT ATTND SEAT (2062VU1) pin 2,
    STA PISA [212LZ] conn. 24 and AFT ATTND SEAT (2062VU3) pin 1,
    STA PISA [212LZ] conn. 17 and AFT ATTND SEAT (2062VU3) pin 2,
    STA PISA [212LZ] conn. 18 and L AFT ATTND SEAT (2062VU2) pin 1,
    STA PISA [212LZ] conn. 25 and M AFT ATTND SEAT (2062VU2) pin 2 ASM 332701.
Subtask 33-27-00-810-054-B ** ON A/C NOT FOR ALL
K. If the operational test gives no maintenance message and the work light does not come on when you push the pushbutton switch:
   (1) If the fault continues:
  • do a check of the related PUSHBUTTON SWITCH and replace it if necessary ASM 332701.
   (2) If the fault continues:
   (3) If the fault continues:
  • do a check and repair the wiring between:
    STA PISA [203LZ] conn. 6 and L FWD ATTND SEAT (2063VU1) pin 1,
    STA PISA [203LZ] conn. 8 and K FWD ATTND SEAT (2063VU1) pin 3,
    STA PISA [203LZ] conn. 37 and M FWD ATTND SEAT (2063VU1) pin 2,
    STA PISA [212LZ] conn. 6 and AFT ATTND SEAT (2062VU1) pin 1,
    STA PISA [212LZ] conn. 36 and AFT ATTND SEAT (2062VU1) pin 2,
    STA PISA [212LZ] conn. 24 and AFT ATTND SEAT (2062VU3) pin 1,
    STA PISA [212LZ] conn. 17 and AFT ATTND SEAT (2062VU3) pin 2,
    STA PISA [212LZ] conn. 18 and L AFT ATTND SEAT (2062VU2) pin 1,
    STA PISA [212LZ] conn. 25 and M AFT ATTND SEAT (2062VU2) pin 2 ASM 332701.
Subtask 33-27-00-810-051-E ** ON A/C NOT FOR ALL
L. If the operational test gives no maintenance message and one of the work lights does not come on:
   (1) If the fault continues:
  • Do a check of the related SWITCH PANEL (2062VU) and/or SWITCH PANEL (2063VU) and replace if necessary ASM 332701.
   (2) If the fault continues:
   (3) If the fault continues:
  • Do a check and repair the wiring between:
    STA PISA [203LZ] connector J2 pin 34 and the switch panel (2063VU1) of the forward attendant seats pin 1,
    STA PISA [203LZ] connector J2 pin 35 and the switch panel (2063VU1) of the forward attendant seats pin 3,
    STA PISA [203LZ] connector J2 pin 19 and the switch panel (2063VU1) of the forward attendant seats pin 2,
    STA PISA [212LZ] connector J2 pin 34 and the switch panel (2062VU1) of the aft attendant seats pin 1,
    STA PISA [212LZ] connector J2 pin 18 and the switch panel (2062VU1) of the aft attendant seats pin 2,
    STA PISA [212LZ] connector J2 pin 36 and the switch panel (2063VU2) of the aft attendant seats pin 1,
    STA PISA [212LZ] connector J2 pin 35 and the switch panel (2063VU2) of the aft attendant seats pin 3,
    STA PISA [212LZ] connector J2 pin 20 and the switch panel (2063VU2) of the aft attendant seats pin 2,
    STA PISA [212LZ] connector J2 pin 37 and the switch panel (2062VU2) of the aft attendant seats pin 1,
    STA PISA [212LZ] connector J2 pin 21 and the switch panel (2062VU2) of the aft attendant seats pin 2 ASM 332701.
Subtask 33-27-00-810-054-E ** ON A/C NOT FOR ALL
M. If the operational test gives no maintenance message and the work light does not come on when you push the pushbutton switch:
   (1) If the fault continues:
  • Do a check of the related SWITCH PANEL (2062VU) and/or SWITCH PANEL (2063VU) and replace if necessary ASM 332701.
   (2) If the fault continues:
   (3) If the fault continues:
  • Do a check and repair the wiring between:
    STA PISA [203LZ] connector J2 pin 34 and the switch panel (2063VU1) of the forward attendant seats pin 1,
    STA PISA [203LZ] connector J2 pin 35 and the switch panel (2063VU1) of the forward attendant seats pin 3,
    STA PISA [203LZ] connector J2 pin 19 and the switch panel (2063VU1) of the forward attendant seats pin 2,
    STA PISA [212LZ] connector J2 pin 34 and the switch panel (2062VU1) of the aft attendant seats pin 1,
    STA PISA [212LZ] connector J2 pin 18 and the switch panel (2062VU1) of the aft attendant seats pin 2,
    STA PISA [212LZ] connector J2 pin 36 and the switch panel (2063VU2) of the aft attendant seats pin 1,
    STA PISA [212LZ] connector J2 pin 35 and the switch panel (2063VU2) of the aft attendant seats pin 3,
    STA PISA [212LZ] connector J2 pin 20 and the switch panel (2063VU2) of the aft attendant seats pin 2,
    STA PISA [212LZ] connector J2 pin 37 and the switch panel (2062VU2) of the aft attendant seats pin 1,
    STA PISA [212LZ] connector J2 pin 21 and the switch panel (2062VU2) of the aft attendant seats pin 2 ASM 332701.
Subtask 33-27-00-810-051-Z ** ON A/C NOT FOR ALL
N. If the operational test gives no maintenance message and one of the work lights does not come on:
   (1) If the fault continues:
  • Do a check of the related SWITCH PANEL (2062VU) and/or SWITCH PANEL (2063VU) and replace it if necessary ASM 332701.
   (2) If the fault continues:
   (3) If the fault continues:
  • Do a check and repair the wiring between:
    STA PISA [203LZ] connector J2 pin 34 and the switch panel (2063VU1) of the forward attendant seats pin 1,
    STA PISA [203LZ] connector J2 pin 35 and the switch panel (2063VU1) of the forward attendant seats pin 3,
    STA PISA [203LZ] connector J2 pin 19 and the switch panel (2063VU1) of the forward attendant seats pin 2,
    STA PISA [212LZ] connector J2 pin 35 and the switch panel (2063VU3) of the aft attendant seats pin 1,
    STA PISA [212LZ] connector J2 pin 34 and the switch panel (2063VU3) of the aft attendant seats pin 3,
    STA PISA [212LZ] connector J2 pin 18 and the switch panel (2063VU3) of the aft attendant seats pin 2,
    STA PISA [212LZ] connector J2 pin 37 and the switch panel (2062VU2) of the aft attendant seats pin 1,
    STA PISA [212LZ] connector J2 pin 21 and the switch panel (2062VU2) of the aft attendant seats pin 2 ASM 332701.
Subtask 33-27-00-810-054-Z ** ON A/C NOT FOR ALL
O. If the operational test gives no maintenance message and the work light does not come on when you push the pushbutton switch:
   (1) If the fault continues:
  • Do a check of the related SWITCH PANEL (2062VU) and/or SWITCH PANEL (2063VU) and replace it if necessary ASM 332701.
   (2) If the fault continues:
   (3) If the fault continues:
  • Do a check and repair the wiring between:
    STA PISA [203LZ] connector J2 pin 34 and the switch panel (2063VU1) of the forward attendant seats pin 1,
    STA PISA [203LZ] connector J2 pin 35 and the switch panel (2063VU1) of the forward attendant seats pin 3,
    STA PISA [203LZ] connector J2 pin 19 and the switch panel (2063VU1) of the forward attendant seats pin 2,
    STA PISA [212LZ] connector J2 pin 35 and the switch panel (2063VU3) of the aft attendant seats pin 1,
    STA PISA [212LZ] connector J2 pin 34 and the switch panel (2063VU3) of the aft attendant seats pin 3,
    STA PISA [212LZ] connector J2 pin 18 and the switch panel (2063VU3) of the aft attendant seats pin 2,
    STA PISA [212LZ] connector J2 pin 37 and the switch panel (2062VU2) of the aft attendant seats pin 1,
    STA PISA [212LZ] connector J2 pin 21 and the switch panel (2062VU2) of the aft attendant seats pin 2 ASM 332701.
Subtask 33-27-00-810-055-A ** ON A/C NOT FOR ALL
P. If the test gives no maintenance message, but no work lights come on:
   (1) If the fault continues:
  • do a check of the RELAY-SYS PWR SPLY [2LZ] and replace it if necessary.
   (2) If the fault continues:
  • do a check and repair the wiring between:
    PWR UNIT (12LZ) conn. A/A and RELAY (2LZ) conn. A/B1,
    PWR UNIT (13LZ) conn. A/A and RELAY (2LZ) conn. A/B1,
    PWR UNIT (3LZ) conn. A/A and RELAY (2LZ) conn. A/B1,
    FAP (120RH) conn. A/13 and RELAY (2LZ) conn. A/X1,
    CB (1LZ) and RELAY (2LZ) conn. A/B2,
    GND and RELAY (2LZ) conn. A/X2 ASM 332701.
Subtask 33-27-00-710-052-A
Q. Do the test as given in the Para. 3.A.
5. Close-up
Subtask 33-27-00-860-050-A
A. Put the aircraft back to its initial configuration.
[Rev.8 from Aug 2018] 2026.04.04 04:31:56 UTC
"WTRUIB" 2025