Loss of the IR OUTPUT BUS 2 Signal from the ADIRU 3

TASK 32-51-00-810-801-A
Loss of the IR OUTPUT BUS 2 Signal from the ADIRU 3

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
ASM 324202
AMM 32-42-34-000-001	Removal of the Braking/Steering Control Unit (BSCU)
AMM 32-42-34-400-001	Installation of the Braking/Steering Control Unit (BSCU)
AMM 32-46-00-740-001	BITE Test of the BSCU

3. Fault Confirmation
Subtask 32-51-00-740-050-A

A. Test
(1) Do a reset of the BSCU with the A/SKID AND NOSE WHEEL switch (5GG).
(2) Do the BITE test of the BSCU AMM 32-46-00-740-001.

4. Fault Isolation
Subtask 32-51-00-810-050-B ** ON A/C NOT FOR ALL

A. If the test gives the maintenance message ADIRU3(1FP3)/BSCU(10GG):

(1) If the fault continues:

do a check and repair the wiring from the BSCU (10GG) pins AA/10J, 10H to the first terminal block ASM 324202.

Subtask 32-51-00-810-050-C ** ON A/C NOT FOR ALL

A. If the test gives the maintenance message BSCU : NO DATA FROM ADIRU3

(1) If the fault continues:

do a check and repair the wiring from the BSCU (10GG) pins AA/10J, 10H to the first terminal block ASM 324202.

Subtask 32-51-00-740-051-A

B. Do the test given in Para. 3.A.

[Rev.8 from Aug 2018] 2026.04.04 04:31:47 UTC