W DOC AIRBUS | TSM A320F

Loss of the Left Yellow Pressure Indication on the Triple Indicator (Electrical Failure)


TASK 32-44-00-810-802-A
Loss of the Left Yellow Pressure Indication on the Triple Indicator (Electrical Failure)


1. Possible Causes
  • PRESS XDCR-BRK,YELLOW L [63GG]
  • wiring from the left Yellow brake pressure-transducer 63GG pins A/D, E to the first terminal block
  • wiring from the left Yellow brake pressure transducer 63GG pin A/A to the first terminal block
  • PRESS XDCR-BRK, YELLOW L [101GG]
  • wiring from the left Yellow brake pressure-transducer 101GG pins A/D, E to the first terminal block
  • wiring from the left Yellow brake pressure transducer 101GG pin A/A to the first terminal block
2. Job Set-up Information
 A. Referenced Information
REFERENCE
DESIGNATION
AMM 31-50-00-710-001
Ground Scanning of the Central Warning System
ASM 324401
AMM 32-44-18-000-001
Removal of the Pressure Transducers
AMM 32-44-18-400-001
Installation of the Pressure Transducers
AMM 32-44-19-000-001
Removal of the Pressure Transducer
AMM 32-44-19-400-001
Installation of the Pressure Transducer
3. Fault Confirmation
Subtask 32-44-00-865-050-A
A. Make sure that this(these) circuit breaker(s) is(are) closed:
PANELDESIGNATIONFINLOCATION
** ON A/C NOT FOR ALL
49VUL/G/Y BRK/PRESS/IND61GGC10
** ON A/C NOT FOR ALL
49VUABCU &/Y BRK/PRESS IND61GGC10
Subtask 32-44-00-710-053-A
B. Test
Do the operational test of the central warning systems (SDAC) AMM 31-50-00-710-001.
4. Fault Isolation
NOTE: After all maintenance operations on the braking system such as hydraulic line disconnection/connection or component replacement, bleed from the brake units (Ref. AMM TASK 32-43-00-870-002).
Subtask 32-44-00-810-051-A ** ON A/C NOT FOR ALL
A. If the test gives the maintenance message SDAC1 : LH Y BRK PRESS XDCR 63GG:
   (1) If the fault continues:
     (a) Do a check and repair the:
  • wiring from the left Yellow brake pressure-transducer 63GG pins A/D, E to the first terminal block
  • wiring from the left Yellow brake pressure transducer 63GG pin A/A to the first terminal block, ASM 324401.
Subtask 32-44-00-810-051-B ** ON A/C NOT FOR ALL
A. If the test gives the maintenance message SDAC1 : LH Y BRK PRESS XDCR 101GG:
   (1) If the fault continues:
     (a) Do a check and repair the:
  • wiring from the left Yellow brake pressure-transducer 101GG pins A/D, E to the first terminal block
  • wiring from the left Yellow brake pressure transducer 101GG pin A/A to the first terminal block, ASM 324401.
Subtask 32-44-00-710-054-A
B. Do the test given in Para. 3.B.
[Rev.8 from Aug 2018] 2026.04.04 04:31:42 UTC