W DOC AIRBUS | TSM A320F

Loss of Alternate Braking on one Landing Gear (HYD Failure)


TASK 32-43-00-810-813-A
Loss of Alternate Braking on one Landing Gear (HYD Failure)


1. Possible Causes
  • hydraulic line
  • DUAL VALVE-ALTN BRK DISTR [2577GM]
  • DUAL SHUTTLE VALVE-BRK YELLOW PRESS [2578GM]
  • related self-sealing couplings
  • alternate brake pistons
  • BRAKE-WHEEL 1 [2643GM]
  • BRAKE-WHEEL 2 [2641GM]
  • BRAKE-WHEEL 3 [2644GM]
  • BRAKE-WHEEL 4 [2642GM]
  • MANIFOLD-ALTN BRK, L [2853GM]
  • MANIFOLD-ALTN BRK, R [2852GM]
2. Job Set-up Information
 A. Referenced Information
REFERENCE
DESIGNATION
AMM 32-42-27-000-001
Removal of the Brake
AMM 32-42-27-400-001
Installation of the Brake
AMM 32-43-00-710-001
Operational Check of Alternate Braking System
AMM 32-43-14-000-001
Removal of the Dual-Valve Alternate Brake-Distribution
AMM 32-43-14-400-001
Installation of the Dual-Valve Alternate Brake-Distribution
AMM 32-43-32-600-001
Reactivation of the Alternate-Brake Manifold Safety-Valve
AMM 32-45-16-000-001
Removal of the Dual Shuttle Valve
AMM 32-45-16-400-001
Installation of the Dual Shuttle Valve
3. Fault Confirmation
Subtask 32-43-00-710-058-A ** ON A/C NOT FOR ALL
A. Test
   (1) Do the operational test of alternate braking with anti-skid AMM 32-43-00-710-001.
   (2) Make sure that there is no pressure to the related side on the triple indicator.
Subtask 32-43-00-710-058-B ** ON A/C NOT FOR ALL
A. Test
   (1) Do the Operational Check to start the Functional Test of the Alternate Braking Automatically (flight simulated) .
4. Fault Isolation
Subtask 32-43-00-810-062-A ** ON A/C NOT FOR ALL
A. If the test confirms the fault:
  • do a check and repair if necessary the leak of the hydraulic line between the alternate-brake distribution dual-valve (2577GM) and the brake Yellow dual shuttle-valve (2578GM).
   (1) If the fault continues:
   (2) If the fault continues:
Subtask 32-43-00-810-062-B ** ON A/C NOT FOR ALL
A. If the operational check gives maintenance message related to alternate braking system:
  • Do the trouble shooting procedure related to the mainternance message.
   (1) If the fault continues:
  • do a check of the connection of the related self-sealing couplings.
     (a) If not correct:
  • correctly adjust the related self-sealing couplings .
   (2) If the fault continues:
  • do a check for leaks on the alternate brake pistons of the related wheels .
     (a) If there are leaks:
   (3) If the fault continues:
  • do a check for leaks on the hydraulic line between the MANIFOLD-ALTN BRK, L [2853GM] or MANIFOLD-ALTN BRK, R [2852GM] and the related brakes unit (wheel 1,2) or (wheel 3,4).
     (a) If there are leaks:
[Rev.8 from Aug 2018] 2026.04.04 04:31:41 UTC