W DOC AIRBUS | TSM A320F

Loss of Alternate Braking on the Wheel 2 (Hydraulic Failure)

TASK 32-43-00-810-810-A
Loss of Alternate Braking on the Wheel 2 (Hydraulic Failure)

1. Possible Causes
  • related self-sealing coupling
  • hydraulic line
  • alternate brake pistons
  • BRAKE-WHEEL 2 [2641GM]
  • SAFETY VALVE-ALTN BRK, WHEEL 2 [2622GM]
  • SERVOVALVE-ALTN BRK WHEEL 2 [43GG]
  • safety valve
2. Job Set-up Information
 A. Referenced Information
REFERENCE
DESIGNATION
AMM 32-42-27-000-001
Removal of the Brake
AMM 32-42-27-400-001
Installation of the Brake
AMM 32-43-00-710-001
Operational Check of Alternate Braking System
AMM 32-43-16-000-001
Removal of the Alternate Brake Safety-Valve
AMM 32-43-16-400-001
Installation of the Alternate Brake Safety-Valve
AMM 32-43-27-000-001
Removal of the Alternate Brake Servovalve
AMM 32-43-27-400-001
Installation of the Alternate Brake Servovalve
AMM 32-43-32-600-001
Reactivation of the Alternate-Brake Manifold Safety-Valve
3. Fault Confirmation
Subtask 32-43-00-710-055-A
A. Test
   (1) Do the operational test of alternate braking with anti-skid AMM 32-43-00-710-001.
   (2) Make sure that the related pistons of the wheel 2 do not extend.
4. Fault Isolation
Subtask 32-43-00-810-059-A ** ON A/C NOT FOR ALL
A. If the test confirms the fault:
  • do a check of the connection of the related self-sealing coupling.
   (1) If not correct:
  • correctly adjust the related self-sealing coupling .
   (2) If the fault continues:
  • do a check for leaks on the hydraulic line between the safety valve (2622GM) and the brake unit (wheel 2).
     (a) If there are leaks:
  • repair the leaks and reactivate the safety valve (2622GM).
     (b) If there are no leaks and if the fault continues:
  • do a check for leaks on the alternate brake pistons of the wheel 2.
       1 If there are leaks:
       2 If there are no leaks and if the fault continues:
   (3) If the fault continues:
Subtask 32-43-00-810-059-C ** ON A/C NOT FOR ALL
A. If the test confirms the fault:
  • do a check of the connection of the related self-sealing coupling.
   (1) If not correct:
  • correctly adjust the related self-sealing coupling .
   (2) If the fault continues:
  • do a check for leaks on the alternate brake pistons of the wheel 2.
     (a) If there are leaks:
   (3) If the fault continues:
  • do a check for leaks on the hydraulic line between the Alternate-Brake Manifold (2853GM) and the brake unit (wheel 2).
     (a) If there are leaks:
  • repair the leaks and reactivate the safety valve on the Alternate-Brake Manifold (2853GM) AMM 32-43-32-600-001.
[Rev.8 from Aug 2018] 2026.04.04 04:31:40 UTC
"WTRUIB" 2025