Failure of the Normal Braking Pressure Transducer

TASK 32-42-00-810-944-A
Failure of the Normal Braking Pressure Transducer

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
AMM 32-42-22-000-001	Removal of the Normal-Brake Supply Pressure-Transducer
AMM 32-42-22-400-001	Installation of the Normal-Brake Supply Pressure-Transducer
AMM 32-46-00-740-001	BITE Test of the BSCU

3. Fault Confirmation
Subtask 32-42-00-740-200-A ** ON A/C NOT FOR ALL

A. Test
(1) Do a reset of the BSCU with the A/SKID AND NOSE WHEEL switch (5GG).
(2) Do the BITE test of the BSCU AMM 32-46-00-740-001.

4. Fault Isolation
Subtask 32-42-00-810-230-A ** ON A/C NOT FOR ALL

A. If the test gives the maintenance message: BRK NORM SELECTOR VALVE PRESS TRANSDUCER(96GG)

(1) If the fault continue:

do a check and repair the wiring between the BSCU (10GG) and the Transducer (96GG) pin AB/7E to pin A/D and pin AB/7F to pin A/E.

Subtask 32-42-00-740-201-A ** ON A/C NOT FOR ALL

B. Do the test given in Para.3.A.

[Rev.8 from Aug 2018] 2026.04.04 04:31:39 UTC