Loss of the Signal from the Green Pressure Switch

TASK 32-42-00-810-823-A
Loss of the Signal from the Green Pressure Switch

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
AMM 29-32-12-000-001	Removal of the System Pressure Switch
AMM 29-32-12-400-001	Installation of the System Pressure Switch
ASM 324203
AMM 32-42-34-000-001	Removal of the Braking/Steering Control Unit (BSCU)
AMM 32-42-34-400-001	Installation of the Braking/Steering Control Unit (BSCU)

3. Fault Confirmation
Subtask 32-42-00-740-068-A

A. Test
Not applicable

4. Fault Isolation
Subtask 32-42-00-810-072-B

A. If the PFR gives the maintenance message GREEN SYSTEM PRESS SWITCH (1151GN):

(1) If the fault continues:

(2) If the fault continues:

do a check and repair the wiring from the pressure switch (1151GN) to the BSCU (10GG) pin A/C to pin AA/13F ASM 324203.

Subtask 32-42-00-740-069-A

B. After the subsequent flight, make sure that the fault does not continue.

[Rev.8 from Aug 2018] 2026.04.04 04:31:32 UTC