Vibrations Felt during Climb because of Incorrect Clearance of the NLG Aft Doors

TASK 32-20-00-810-803-A
Vibrations Felt during Climb because of Incorrect Clearance of the NLG Aft Doors

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
TSM TASK 05-50-00-810-801-A	Identification of the Cause of In-Flight Airframe Vibrations and/or Noises
AMM 32-22-00-220-002	Check of the Aft Nose-Gears Door Gap
AMM 32-22-00-820-001	Adjustment of the NLG doors

3. Fault Confirmation
Subtask 32-20-00-710-050-A ** ON A/C NOT FOR ALL

A. Test
(1) Make sure that the identification of the cause of the vibrations is correct (Ref. TSM TASK 05-50-00-810-801).

4. Fault Isolation
Subtask 32-20-00-810-053-B

A. If you felt vibrations during climb:

do a check of the NLG door gaps and mismatches AMM 32-22-00-220-002

(1) If necessary, adjust the NLG doors. AMM 32-22-00-820-001

Subtask 32-20-00-710-051-A ** ON A/C NOT FOR ALL

B. After the subsequent flight, make sure that the fault does not continue.

[Rev.8 from Aug 2018] 2026.04.04 04:31:19 UTC