Brightness too Low on the Lower ECAM DU

TASK 31-63-82-810-862-A
Brightness too Low on the Lower ECAM DU

1. Possible Causes

DU-ECAM, LOWER [4WT2]

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
AMM 31-60-00-740-010	Operational Check of Brightness Control Through MCDU
AMM 31-63-22-000-001	Removal of the Display Unit
AMM 31-63-22-400-001	Installation of the Display Unit

3. Fault Confirmation
Subtask 31-63-82-710-057-A ** ON A/C NOT FOR ALL

A. Test
(1) Do the operational check of the brightness control through the MCDU AMM 31-60-00-740-010.

4. Fault Isolation
Subtask 31-63-82-810-154-A ** ON A/C NOT FOR ALL

A. If the DU SD(4WT2) message comes into view:
(1) Replace DU-ECAM, LOWER [4WT2] AMM 31-63-22-000-001 and AMM 31-63-22-400-001.
(2) Do the test(s) given in the Para. Fault Confirmation.

Subtask 31-63-82-810-155-A ** ON A/C NOT FOR ALL

B. If the DU SD(4WT2) / BRIGHTNESS message comes into view and if the flight crew confirmed that the brightness was too low:
(1) Replace DU-ECAM, LOWER [4WT2] AMM 31-63-22-000-001 and AMM 31-63-22-400-001.
(2) Do the test(s) given in the Para. Fault Confirmation.

[Rev.8 from Aug 2018] 2026.04.04 04:31:18 UTC