Loss of the Indication on one CRT (Diagonal)

TASK 31-63-00-810-970-A
Loss of the Indication on one CRT (Diagonal)

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
AIPC 279208

3. Fault Confirmation
Subtask 31-63-00-700-051-A

A. Not applicable, the fault is intermittent.

4. Fault Isolation
Subtask 31-63-00-810-220-A

A. If diagonal is shown on one CRT during action on takeover and priority pushbutton switch:

replace RELAY-TAKEOVER & PRIORITY 1 [47CE1] or RELAY-TAKEOVER & PRIORITY 2 [47CE2] AIPC 279208.

[Rev.8 from Aug 2018] 2026.04.04 04:30:50 UTC