Loss of the ARINC 429 Link from the FWC2 to the DMC3

TASK 31-63-00-810-966-A
Loss of the ARINC 429 Link from the FWC2 to the DMC3

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
ASM 315205
AMM 31-60-00-740-002	Perform Electronic Instrument System (EIS) Input Test
AMM 31-60-00-740-007	GROUND SCANNING Test of the DMC
AMM 31-63-34-000-001	Removal of the DMC
AMM 31-63-34-400-001	Installation of the DMC

3. Fault Confirmation
Subtask 31-63-00-865-195-A

A. Make sure that this(these) circuit breaker(s) is(are) closed:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
121VU	EIS/FWC2/SPLY	2WW	Q07

Subtask 31-63-00-740-342-A ** ON A/C NOT FOR ALL

B. Test
Do the EIS input test (system 3) AMM 31-60-00-740-002.

Subtask 31-63-00-740-342-B ** ON A/C NOT FOR ALL

B. Test
Do the Ground Scanning Test of the DMC AMM 31-60-00-740-007.

4. Fault Isolation
Subtask 31-63-00-810-214-A ** ON A/C NOT FOR ALL

A. If the test gives the maintenance message:
DMC3: NO FWC2 DATA

(1) If the fault continues:

do a check and repair the wiring from DMC3 (1WT3) pins AA/10J, 10K to the first terminal block ASM 315205.

Subtask 31-63-00-810-214-B ** ON A/C NOT FOR ALL

A. If the test gives the maintenance message:
FWC2(1WW2) BUSX DATA/DMC3(1WT3)

(1) If the fault continues:

do a check and repair the wiring from DMC3 (1WT3) pins AD/8C, 8D to the first terminal block ASM 315205.

Subtask 31-63-00-740-343-A

B. Do the test given in Para. 3.B.

[Rev.8 from Aug 2018] 2026.04.04 04:40:06 UTC