Loss of the WXR 1 Output Bus by the DMC 2

TASK 31-63-00-810-916-A
Loss of the WXR 1 Output Bus by the DMC 2

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
AMM 31-60-00-740-002	Perform Electronic Instrument System (EIS) Input Test
AMM 31-60-00-740-004	EIS System Test
ASM 316201
AMM 31-63-34-000-001	Removal of the DMC
AMM 31-63-34-400-001	Installation of the DMC

3. Fault Confirmation
Subtask 31-63-00-865-148-A

A. Make sure that this(these) circuit breaker(s) is(are) closed:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
121VU	COM NAV/RADAR/1	5SQ1	K13

Subtask 31-63-00-740-242-A ** ON A/C NOT FOR ALL

B. Test
Do the EIS input test AMM 31-60-00-740-002.

Subtask 31-63-00-740-242-B ** ON A/C NOT FOR ALL

B. Test
Do the EIS system test AMM 31-60-00-740-004.

4. Fault Isolation
Subtask 31-63-00-810-164-A

A. If the test gives the maintenance message DMC 2 : NO WXR 1 DATA:

(1) If the fault continues:

do a check of the wiring from the DMC 2 (1WT2) pins AA/12A, 12B to the first terminal block ASM 316201.

(a) If there is no continuity:

(b) If there is continuity:

do a check and repair the wiring from the DMC 2 (1WT2) pins AA/12C, 12D to the first terminal block .

Subtask 31-63-00-740-243-A

B. Do the test given in Para. 3.B.

[Rev.8 from Aug 2018] 2026.04.04 04:30:46 UTC