Loss of the IRS 1 Output Bus by the DMC 1
TASK 31-63-00-810-847-A
Loss of the IRS 1 Output Bus by the DMC 1
1. Possible Causes
2. Job Set-up Information
A. Referenced Information
3. Fault Confirmation
Subtask 31-63-00-865-079-A
Subtask 31-63-00-810-095-A ** ON A/C NOT FOR ALL
[Rev.8 from Aug 2018]
2026.04.04 04:30:40 UTC
Loss of the IRS 1 Output Bus by the DMC 1
1. Possible Causes
2. Job Set-up Information
A. Referenced Information
| REFERENCE | DESIGNATION |
|---|---|
| AMM 31-60-00-740-002 | Perform Electronic Instrument System (EIS) Input Test |
| AMM 31-60-00-740-007 | GROUND SCANNING Test of the DMC |
| ASM 316201 | |
| AMM 31-63-34-000-001 | Removal of the DMC |
| AMM 31-63-34-400-001 | Installation of the DMC |
| AMM 34-12-34-000-001 | Removal of the ADIRU |
| AMM 34-12-34-400-001 | Installation of the ADIRU |
Subtask 31-63-00-865-079-A
A. Make sure that this(these) circuit breaker(s) is(are) closed:
Subtask 31-63-00-740-104-A ** ON A/C NOT FOR ALL Subtask 31-63-00-740-104-B ** ON A/C NOT FOR ALL 4. Fault Isolation| PANEL | DESIGNATION | FIN | LOCATION |
|---|---|---|---|
| ** ON A/C ALL | |||
| 49VU | NAV PROBES/ADIRU 1/AND AOA 1/26VAC | 5FP1 | F07 |
| 49VU | NAV PROBES/ADIRU1/115VAC | 4FP1 | F06 |
| 105VU | ADIRS/ADIRU1/28VDC | 6FP1 | C02 |
Subtask 31-63-00-810-095-A ** ON A/C NOT FOR ALL
A. If the test gives the maintenance message DMC 1 : NO IRS 1 DATA:
Subtask 31-63-00-810-095-B ** ON A/C NOT FOR ALL - replace the DMC-1 [1WT1] AMM 31-63-34-000-001 and AMM 31-63-34-400-001.
- replace the ADIRU-1 [1FP1] AMM 34-12-34-000-001 and AMM 34-12-34-400-001.
- do a check and repair the
wiring from the ADIRU 1 (1FP1) to the DMC 1 (1WT1) ASM 316201.
A. If the test gives the maintenance message ADIRU1(1FP1) BUSX IR / DMC1(1WT1)
Subtask 31-63-00-740-105-A - replace the DMC-1 [1WT1] AMM 31-63-34-000-001 and AMM 31-63-34-400-001.
- replace the ADIRU-1 [1FP1] AMM 34-12-34-000-001 and AMM 34-12-34-400-001.
- do a check and repair the
wiring from the ADIRU 1 (1FP1) to the DMC 1 (1WT1) ASM 316201.
On the DMC:
Pins AA/4C, 4D for the BUS 1
Pins AA/4G, 4H for the BUS 2
Pins AA/2E, 2F for the BUS 3
B. Do the test given in Para. 3.B.