W DOC AIRBUS | TSM A320F

Loss of the ADC 2 Output Bus by the DMC 2


TASK 31-63-00-810-828-A
Loss of the ADC 2 Output Bus by the DMC 2


1. Possible Causes
  • DMC-2 [1WT2]
  • ADIRU-2 [1FP2]
  • wiring from the ADIRU 2 (1FP2) to the DMC 2 (1WT2)
  • wiring
2. Job Set-up Information
 A. Referenced Information
REFERENCE
DESIGNATION
AMM 31-60-00-740-002
Perform Electronic Instrument System (EIS) Input Test
AMM 31-60-00-740-007
GROUND SCANNING Test of the DMC
ASM 316201
AMM 31-63-34-000-001
Removal of the DMC
AMM 31-63-34-400-001
Installation of the DMC
AMM 34-12-34-000-001
Removal of the ADIRU
AMM 34-12-34-400-001
Installation of the ADIRU
3. Fault Confirmation
Subtask 31-63-00-865-060-A
A. Make sure that this(these) circuit breaker(s) is(are) closed:
PANELDESIGNATIONFINLOCATION
** ON A/C NOT FOR ALL
121VUADIRS/ADIRU/2PWR/SHED10FPN10
** ON A/C ALL
121VUADIRS/ADIRU/2/26VAC AND AOA5FP2N08
121VUADIRS/ADIRU/2/115VAC4FP2N06
121VUADIRS/ADIRU/2/28VDC6FP2N04
** ON A/C NOT FOR ALL
121VUADIRS/2PWR/SHED &/AOA2 MON10FPN10
Subtask 31-63-00-740-066-A ** ON A/C NOT FOR ALL
B. Test
Do the EIS input test AMM 31-60-00-740-002.
Subtask 31-63-00-740-066-B ** ON A/C NOT FOR ALL
B. Test
Do the Ground Scanning Test of the DMC AMM 31-60-00-740-007.
4. Fault Isolation
Subtask 31-63-00-810-076-A ** ON A/C NOT FOR ALL
A. If the test gives the maintenance message DMC 2 : NO ADC 2 DATA:
   (1) If the fault continues:
   (2) If the fault continues:
  • do a check and repair the wiring from the ADIRU 2 (1FP2) to the DMC 2 (1WT2) ASM 316201.
Subtask 31-63-00-810-076-B ** ON A/C NOT FOR ALL
A. If the test gives the maintenance message ADIRU2(1FP2) BUS1 ADR/DMC2(1WT2)
   (1) If the fault continues:
  • do a check and repair the wiring from ADIRU2(1FP2) pins AA-3A/3B to DMC2(1WT2) pins AA-5G/5H ASM 316201.
   (2) If the fault continues:
Subtask 31-63-00-740-067-A
B. Do the test given in Para. 3.B.
[Rev.8 from Aug 2018] 2026.04.04 04:40:07 UTC