Loss of the APU/EGIU 2 Bus of the SDAC 2

TASK 31-54-00-810-910-A
Loss of the APU/EGIU 2 Bus of the SDAC 2

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
AMM 24-22-33-000-001	Removal of the EGIU-1(2)
AMM 24-22-33-400-002	Installation of the EGIU-1(2)
AMM 31-50-00-710-001	Ground Scanning of the Central Warning System
ASM 315403
AMM 31-55-34-000-001	Removal of the SDAC
AMM 31-55-34-400-001	Installation of the SDAC

3. Fault Confirmation
Subtask 31-54-00-710-256-A ** ON A/C NOT FOR ALL

A. Test
Do the ground scanning of the central warning systems AMM 31-50-00-710-001.

4. Fault Isolation
Subtask 31-54-00-810-159-A ** ON A/C NOT FOR ALL

A. If the test gives the maintenance message SDAC2 : NO DATA FROM EGIU2-2:

(1) If the fault continues:

(a) If the fault continues:

do a check and repair the wiring from the SDAC2 (1WV2) to the EGIU2 (22XU2) from pins AB/10J, 10K to pins AB/13C, 13D ASM 315403.

Subtask 31-54-00-710-257-A ** ON A/C NOT FOR ALL

B. Do the test given in Para. 3.

[Rev.8 from Aug 2018] 2026.04.04 04:30:30 UTC