Loss of the YELLOW RSVR TEMP Input of the SDAC 1

TASK 31-54-00-810-839-A
Loss of the YELLOW RSVR TEMP Input of the SDAC 1

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
ASM 293301
AMM 31-50-00-710-001	Ground Scanning of the Central Warning System
AMM 31-55-34-000-001	Removal of the SDAC
AMM 31-55-34-400-001	Installation of the SDAC

3. Fault Confirmation
Subtask 31-54-00-865-078-A

A. Make sure that this(these) circuit breaker(s) is(are) closed:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C ALL
123VU	Y HYD/ELEC/ELEC PUMP/NORM	3801GX	AB03

Subtask 31-54-00-710-114-A

B. Test
Do the ground scanning of the central warning systems AMM 31-50-00-710-001.

4. Fault Isolation
Subtask 31-54-00-810-088-A

A. If the test gives the maintenance message SDAC1 : Y HYD TEMP XMTR 3381GR:

(1) If the fault continues:

do a check and repair the wiring from the SDAC 1 (1WV1) pins AE/12J, 12K to the first terminal block , ASM 293301.

Subtask 31-54-00-710-115-A

B. Do the test given in Para. 3.

[Rev.8 from Aug 2018] 2026.04.04 04:30:26 UTC