Loss of the ENG 1 OIL PRESS Input of the SDAC 2

TASK 31-54-00-810-828-A
Loss of the ENG 1 OIL PRESS Input of the SDAC 2

1. Possible Causes

2. Job Set-up Information
A. Referenced Information

REFERENCE	DESIGNATION
AMM 31-50-00-710-001	Ground Scanning of the Central Warning System
AMM 31-55-34-000-001	Removal of the SDAC
AMM 31-55-34-400-001	Installation of the SDAC
ASM 793601

3. Fault Confirmation
Subtask 31-54-00-865-067-A

A. Make sure that this(these) circuit breaker(s) is(are) closed:

PANEL	DESIGNATION	FIN	LOCATION
** ON A/C NOT FOR ALL
121VU	ENGINE/ENG1/OIL/PRESS	2EN1	N40

Subtask 31-54-00-710-092-A

B. Test
Do the ground scanning of the central warning systems AMM 31-50-00-710-001.

4. Fault Isolation
Subtask 31-54-00-810-077-A

A. If the test gives the maintenance message SDAC2 : ENG1 OIL PRESS XMTR 4003EN:

(1) If the fault continues:

do a check and repair the wiring from the SDAC 2 (1WV2) pins AB/15C, 15D to the first terminal block , ASM 793601.

Subtask 31-54-00-710-093-A

B. Do the test given in Para. 3.

[Rev.8 from Aug 2018] 2026.04.04 04:30:25 UTC